Where the drain plug is located?

Where the drain plug is located?

oil pan
The drain plug is a large nut or plug located under the oil pan at the bottom of the engine. If you can’t reach your oil drain plug easily, you’ll have to either crawl under your car to reach it or jack up the car.

What type of oil does a 1995 BMW 325i use?

Engine Oil

Viscosity: 10W-30 (-20 To 10) 10W-40 (-20 To 20) 15W-40 (Above -15) 5W-20 (Below 0) 5W-30 (Below 10)
Capacity: 6.9 quarts. (with filter)After refill check oil level.
Torque: M22x1.5 – 45 ft/lbs (Oil Drain Plug) M18x1.5 – 26 ft/lbs (Oil Drain Plug) M12x1.5 – 19 ft/lbs (Oil Drain Plug)

What is an oil drain plug?

The oil drain plug is a screw plug made of metal or plastic. The oil drain plug with sealing ring seals the drain opening. This opening is needed to drain waste oil when changing the oil before refilling.

How do you measure a oil drain plug?

Oil drain plug diameter is best measured in millimeters using digital calipers. Measure the width of the plug across the base of the plug, at the widest part of the threads.

Which oil is best for BMW 325i?

Motor oil Helix Ultra ECT 5W-30 fully complies with the specification for the 325i, -Touring (N53, E90/E91) (3 Series) (P) (2007-) and is the ideal lubricant for this car BMW.

How much oil does BMW 325i take?

Replacing it, on the other hand, can cost a pretty penny. You’ll need roughly 6.9 Quarts of engine oil to replace the oil in your 2006 bmw 325i.

Where is the oil filter on a BMW 325i?

It’s a black round cap under the hood, located at the front right side of the motor right on top. You will need a filter wrench or strap wrench to remove the cap, it just unscrews counter-clockwise. The oil filter is right under the filter cap, just pull it out and place it in a plastic waste bag.

Begin typing your search term above and press enter to search. Press ESC to cancel.

Back To Top