Table of Contents
What is tungsten disulfide used for?
They are used as solid lubricants, dry film lubricants and in self-lubricating composite materials. They are especially effective in environments of high pressure, high vacuum and high load. They are also used as semiconductor materials. Also used as the fuel cells of the anode and anode sensors.
How do you use tungsten disulfide coating?
Clean and degrease the part. Mix NanoSlick Lubricant’s Tungsten Disulfide powder with Isopropyl (also know as Industrial) Alcohol to make paste. Apply the paste on part and also on cotton buffing wheel and let it dry. When paste is dry start buffing the part with buffing wheel.
Is tungsten disulfide magnetic?
Tungsten Disulfide (WS2) and Molybdenum Disulfide (MoS2) are two of the most popular industrial dry film lubricants. Both are dry lubricants, non magnetic, and are compatible with liquids such as paint, oil, fuel, and solvents.
What is WS2 used for?
WS2 is used as friction reducing agents for aerospace and aircraft components. In the injection molding industry, it helps to reduce friction during the molding process. The parts do not stick to the mold and release more quickly. It is also used for chains, end mills, bearings, and gear boxes, among many others.
What color is tungsten disulfide?
Blue / Grey
Tungsten Disulfide (WS2) Specs:
| Specification: | Data: |
|---|---|
| Coefficient of Friction: | 0.03 – 0.09 |
| Operating Temperature: | -460°F – 1,200°F |
| Color: | Blue / Grey |
| Food Contact: | No |
What is dry film lubricant?
Dry film lubricants or solid film lubricants are materials that reduce friction between surfaces in many extreme environments including those with high and low temperature, high and low pressure and where liquids and oils cannot be used.
How do I uninstall Dicronite?
Dicronite® transmigrates into the molecular structure of the substrate and can only be eliminated by removing the bonded substrate. Industrial applications: Mold operation, mold release, lubricity (can be applied to similar or non-similar substrates to prevent wear, galling and seizing.
What is the name of WS2?
Tungsten disulfide
Tungsten disulfide
| PubChem CID | 82938 |
|---|---|
| Structure | Find Similar Structures |
| Chemical Safety | Laboratory Chemical Safety Summary (LCSS) Datasheet |
| Molecular Formula | WS2 or S2W |
| Synonyms | Tungsten disulfide 12138-09-9 tungsten(IV) sulfide Tungsten sulfide (WS2) Tungsten disulphide More… |
What area is WS2?
WALSALL
Coverage
| Postcode district | Post town | Coverage |
|---|---|---|
| WS2 | WALSALL | Pleck, Bentley, Leamore |
| WS3 | WALSALL | Bloxwich, Coal Pool, Pelsall |
| WS4 | WALSALL | Rushall |
| WS5 | WALSALL | Bescot, Tamebridge, Yew Tree |
What is graphite lubricant good for?
It creates a quick drying film that provides long-lasting lubrication. It’s recommended as a general maintenance lubricant on gaskets, transfer belts and conveyor belts. Also for use for high temperature, low load, locks, rollers, wheels, gears, chains and hoists.
How long does dry film lubricant last?
For example, Whitford’s Xylan coatings can last up to 2500hrs in salt-spray with less than 15% red rust when applied over a plated component. If a part is not plated, Dow’s Molykote D-708 can achieve over 700hrs in salt-spray when applied over a phoshpated part.
How is Dicronite applied?
Dicronite® is applied at one of many licensed coating facilities. After surface preparation, Dicronite® dry lubricants impinged onto the substrate surface. The coating process is conducted at ambient conditions. The material includes no binders or adhesives and requires no curing.
How is tungsten disulfide ( WS2 ) powder coated?
The powder can be coated by spraying (at 120 psi) the substrate with dry (& cool) pneumatic air. It does not require any binders and spraying can be done at normal room temperature. Coated film will be 0.5 micron thick.
What kind of lubricant can you use with tungsten disulfide?
Tungsten Disulfide (WS2) is compatible with lubricants such a hydraulic fluid, oils, and greases. Raw Material: Must be finely powdered Tungsten Disulfide (WS2) free from contaminants such as graphite, molybdenum disulfide, binders or other materials so as to be compatible in liquid oxygen systems and hard radiation environments.
Do you need bakeout for tungsten disulfide coating?
No bakeout or heat curing is required for the application of Tungsten Disulfide (WS2). Tungsten Disulfide combination coatings for additional wear & corrosion protection. Provides additional wear protection from the 70Rc hardness of the chrome or EN and the low friction of Tungsten Disulfide.
What is the chemical name for tungsten sulfide?
Tungsten Disulfide, also known as Tungsten Sulfide or WS2 (“W” is the chemical symbol for Wolfram which is the original chemical name for Tungsten), is a chemical compound that occurs naturally as the mineral Tungstenite and that can also be produced chemically.