How much does it cost to refinish 1000 square feet of hardwood floors?

How much does it cost to refinish 1000 square feet of hardwood floors?

Cost to refinish hardwood floors

Room size	Square feet	Average cost
20×20	400	$1,000 – $2,000
24×24	576	$1,200 – $2,800
Stairs (12 to 14 steps)	—	$300 – $1,200
Whole house	1,000	$2,000 – $4,000

How much per square foot does it cost to refinish a hardwood floor?

Cost to Refinish Hardwood Floors Refinishing hardwood floors costs $1,770 on average with a typical range between $1,075 and $2,490. You can expect to pay anywhere from $3 to $8 per square foot. For large and complex jobs, you might spend up to $4,000. The more area you have, the lower the square foot price.

How much does it cost to refinish 500 square feet of hardwood floors?

Cost per square foot to refinish hardwood floors:

Flooring square footage	Average cost
100 – 250 sq. ft.	$600
251 – 500 sq. ft.	$750
501 – 750 sq. ft.	$1,601
751 – 1000 sq. ft.	$2,100

How much is refinishing per square foot?

On a per-square-foot-analysis, average costs of refinishing hardwood floors can range from $3.52 to $5.00. However, these costs vary dynamically with the size of the area and the complexity of the work. Notably, per-square-foot prices may be lower if your contractor will be refinishing the whole house.

Is it cheaper to refinish or replace hardwood floors?

In general, it will almost ALWAYS be less expensive to refinish your hardwood floors. If you replace them, you need to pay for additional wood as well as ripping up and hauling away existing hardwood. Even if you have this, it will still be less expensive then replacing the whole floor.

Do baseboards need to be removed to refinish hardwood floors?

As a general rule, we recommend leaving your base and shoe on when having your floors refinished, especially if it is painted. Depending on how the painters prepped your base, you can actually cause more damage to the base and walls by removing it.

How much does it cost for hardwood floors 1500 SF?

Expect to pay between $4,500 and $30,000 for 1,500 square feet of solid wood flooring. The species of wood you choose for your home can be a big determinant of the installation costs.

How much does it cost to have floors refinished?

The cost is minimal when you do it yourself rather than letting the job for contractor companies. Last but not least, some exotic floor types such as cumaru, ipe or wenge are usually charged more to refinish. You should spend on average $1.5 to $4 per square foot to sand and polish a hardwood floor.

What is the difference between refinishing and resurfacing wood floors?

What’s the Difference? Refinishing involves sanding down the uppermost layer of the floor and applying fresh stain and lacquer over the existing wood. Resurfacing your floor involves more than just putting a layer of polish on top.

How much does it cost to rip up hardwood floors?

The cost to remove a hardwood floor is about $353 with average prices ranging from $195 to $865 in the US for 2020, according to RemodelingExpense. The average cost per sq ft for hardwood flooring removal is about $3.52 per sq ft with average prices ranging from $1.95 per sq ft to $4.33 per sq ft.

How often do hardwood floors need to be refinished?

every seven to ten years
A solid hardwood plank at least 3/4 inches thick will likely need to be refinished four to six times during its total lifespan. It’s commonly accepted that you refinish every seven to ten years.

What grit sandpaper do you use to sand hardwood floors?

Start with 36-grit sandpaper for a floor that hasn’t been sanded in a long time or that has a lot of heavy finish on it. Floors that have been painted may even require you to go tougher and use 24 or 16-grit paper. Maple floors are so hard that they often require 36-grit sandpaper as well.