Table of Contents
How do you remove a gas tank from a Yamaha bolt?
Re: Removing the fuel tank Remove the seat 10mm socket, Undo the two 5mm Allen bolts either side of the tank. You will then be able to move the fuel tank back and up enough to get to the blue plug under the tank, just press the tab and it pulls off easy.
How do you take off a gas tank?
Part 2 of 2: Replacing your fuel tank
- Materials Needed.
- Step 1: Park your vehicle on a flat, hard and level surface.
- Step 2: Remove any fuel from the vehicle.
- Step 3: Place the wheel chocks around the front tires.
- Step 4: Raise the car up using the floor jack.
- Step 5: Rest the car on the jack stands.
What will dissolve old gas?
Sea Foam works to prevent or dissolve the various forms of petroleum fuel and oil residues. When added to gasoline, Sea Foam not only helps to dissolve harmful varnish, gum, residues and deposits, it prevents them from forming in fresh fuel, making it an excellent long-term fuel stabilizer.
How do you remove por 15 from a gas tank?
The POR will need to be flushed out of the fuel nipples along with the paint stripper – probably by using paint thinner. Putting in a gallon (or so) of of super clean (5% sodium hydroxide) in the tank afterward will help. The superclean can be removed with water and the tank flushed.
How long is a Yamaha bolt?
Yamaha XVS 950 V-Star Bolt R-Spec
|Yamaha XVS 950 V-Star Bolt R Spec
|130 mm / 5.1 in
|Length 2290 mm / 90.2 in Width 830 mm / 37.2 in Height 1120 mm / 44.1in
|1570 mm / 61.8 in
What is the first step in removing a fuel tank?
First, you’ll need to lift the vehicle so you can remove the tank. If there’s gas in the tank, you’ll have to drain it into an approved container first. Next, remove the clamps from the fill lines and then remove the fill lines as you prepare to drop the gas tank.
What is the first thing that should be disconnected when removing a fuel tank?
If necessary, use a pry bar to help release the tank. If you did not do it in Step 7, unplug the electrical connector and disconnect the fuel hose clamps as soon as you have access to them. Do not forget that the filler hose is attached to the side of the tank.
How do you remove the seat on a Yamaha Virago?
It takes around 15 minutes to remove a Virago seat.
- Use a screwdriver to unscrew the screws holding both the battery box cover on the right-hand side and the left box cover on the left.
- Use and Allen wrench to remove the hex nut at the top left corner of the tool box and then remove the tool box.
How do you clean a gas tank with baking soda and vinegar?
The safest method of chemical rust removal involves mixing vinegar and baking soda to fill (or nearly fill) the tank. Let the mixture sit until it bubbles up and begins to change color with the rust particles. Then rinse thoroughly to ensure it’s completely empty.
How long does POR-15 gas tank sealer take to dry?
Cure Time: Let POR-15® Fuel Tank Sealer cure for at least 96 hours (4 days) before returning to service. Drain all fuel from tank, remove tank from vehicle, and clean out tank. All fuel tanks are dirty and have to be cleaned out before sealing.