How do you change your oil?
How to Change Your Oil
- Step 1: Jack It Up, Open It Up. First, you’ll want to lift the car high enough to give yourself room to work under it.
- Step 2: Unplug It, Drain It.
- Step 3: Off With the Old Filter.
- Step 4: Drain Plug in, Filter On.
- Step 5: Fill It Back Up with Oil.
- Step 6: Check the Oil Level, Check for Leaks.
Can you change the oil without removing the plug?
This means you don’t have to remove the oil plug or replace any washers or gaskets, and you eliminate the risk of cross threading the oil pan when you replace your plug. You still have to jack up the car to throw the lever, then drain the oil into a pan like you normally would. Still, it does save some time.
How do you siphon oil out of an engine?
If you have a long enough piece of tubing, you can stick the excess down the dipstick tube, put your thumb over the end, pull out the slack (that is now full of oil) and you’ll have an immediate siphon. Also remember to siphon the oil back into the original container – you might as well keep it until you do need it.
Which way do you unscrew a oil drain plug?
Where you plug in the socket, use the wrench to loosen the plug in a counterclockwise direction. Once relaxed, you can use your hand and remove the plug. The hot oil will begin to pour out. Ensure that all the old oil goes into the pan.
What size socket is an oil plug?
Place a 3/8-inch (0.9 centimeters) socket in the socket wrench, fit it over the drain plug’s nut and turn it counterclockwise. The oil drain plug should open easily, draining the used oil from the engine.
Can you change oil yourself?
Unless your car’s oil filter and/or oil drain plug is impossible to reach, you can save money by changing your oil and oil filter yourself (your car’s manual should tell you how much oil to get and how often to change your oil).