Table of Contents
How do I identify my toilet parts?
Look for the manufacturer name or a number on the bottom side of the water tank lid. It may be stamped into the lid or painted on – some of them may even be handwritten if the tank lid was replaced by a plumber with foresight.
How do I know what model American Standard toilet I have?
Where can I find the model number of my toilet? Carefully remove your tank lid, and place it gently on the floor. You’ll notice a four-digit number located on the back of the tank, near the water level mark. This is your tank model number.
Are toilet repair parts universal?
A universal kit gives you everything you need to repair a leaky or malfunctioning standard toilet, including the fill valve, flapper, refill tube, and all the hardware that goes with it.
What are the parts called inside a toilet?
There are really only two main toilet tank parts: The toilet flush valve, which lets water gush into the bowl during the flush, and the fill valve, which lets water refill the tank after the flush. When a toilet runs constantly or intermittently, one of these valves is usually at fault.
What are parts of a toilet called?
On a gravity-fed toilet the tank houses the fill valve (frequently called a “ballcock”), the flush valve (usually including an overflow tube with a flapper and flapper seat) and the flush or trip lever. These parts are called “trim.”
Where is the toilet model number located?
All toilets have model numbers which are typically located on the underside of the tank lid.
How do I know if my toilet is round or elongated?
You can determine the shape by measuring the distance from the back of the toilet bowl to its front edge. Here’s how you do it. If the length is between 18-19.5 inches, you have an elongated toilet bowl seat. If the length is between 17-17.75 inches, you have a round toilet bowl seat.
Are all toilet parts the same?
Toilets come in different shapes, sizes and styles. Two-piece toilets, made with a tank and bowl that are bolted together, are the more common option. However, one-piece toilets, made from a single mold for a more contemporary look, are also available. The bowl and tank of a one-piece toilet can’t be separated.
Where is the toilet flapper?
The toilet flapper is the component inside your toilet tank that lets water flow out of the tank and into the bowl when you flush. This round, rubber disc is attached to the bottom of the overflow tube, usually by mounting arms that hook onto ears on either side of the overflow tube.
Why would my toilet be leaking from the bottom?
Why is the toilet is leaking from the base? The leak is usually caused when the seal under the toilet fails. Wait until a new puddle appears on the floor, then check to make sure the water is seeping out from under the toilet and not coming from a loose supply tube, faulty shutoff valve, cracked tank or sweaty bowl.