Can you use a shorter belt to bypass AC compressor?

Can you use a shorter belt to bypass AC compressor?

The compressor cannot be bypassed without the use of a compressor bypass pulley. Install a new pulley or pulley bearing if it can come off of the compressor and then put on a new belt. …

Is it safe to bypass AC compressor?

AIR CONDITIONING COMPRESSOR BYPASS PULLEYS. If the AC compressor on your classic car has stopped working and you would rather not replace it, installing an AC compressor bypass pulley is a viable option for safely and efficiently removing your factory AC compressor.

What size serpentine belt do I need to bypass AC compressor?

You need a 79 inch belt.

Can I use a smaller serpentine belt?

Belts can be tricky, so we usually recommend buying two or three different slightly shorter belts so that you can test fit each one. Most vehicles have a spring tensioner that puts tension on the serpentine belt. Keep in mind that spring tensioners are a wear part!

Can I bypass the AC compressor pulley?

The compressor cannot be bypassed without the use of a compressor bypass pulley. It would cost more for a bypass for the compressor than it would be to just replace the compressor pulley. Install a new pulley or pulley bearing if it can come off of the compressor and then put on a new belt.

Can you run a car without an AC compressor?

Can a car drive without an air compressor? Without a compressor, you will need a bypass pulley and a special length of belt. If the clutch and / or pulley of your compressor is good, you can continue to use the car without a compressor without any problems. You will need a bypass pulley and a special belt length.

Will a bad AC compressor break serpentine belt?

Hi there, yes, the air conditioning compressor is capable of breaking the serpentine belt a couple of ways. If the AC compressors seizes while operating, the shock load can snap the serpentine belt. Replacing the serpentine belt tensioner and idler pulley at the same time as the belt is always a good idea.

What is the length of a serpentine belt?

Most OE replacement serpentine belts are 4 to 6 rib belts and the length is referred to in inches and/or millimeters. A Dayco serpentine belt for a 2002 LS1 Camaro is listed as a PN 5060790 is a six-rib belt that is 79 inches in effective length represented by the last three digits in the part number.

Do serpentine belts come in different sizes?

Serpentine belts break or wear out for a variety of reasons. Most of the time, the owner’s manual or your local auto store will be able to tell you what size belt you will need. However, you can figure out what size of belt you need on your own without any fancy equipment.

Does alternator pulley size matter?

In order to boost output at lower RPM, it is beneficial to spin the alternator faster by using a slightly smaller pulley to accomplish this. In most cases you should be able to use the alternator with the smaller pulley without having to use a smaller belt.

Can you bypass the AC with a serpentine belt?

Sometimes a problem with your air conditioning compressor can cause it to actually lock up. There is a way around this problem however; you can actually bypass the compressor all together with a different serpentine belt.

What happens if you don’t replace AC compressor?

Refrigerant could be leaking out of the compressor and that could lead to potential health concerns such as coughs, headaches, irritated eyes and nausea. If all the refrigerant leaks out, it could cause the unit to overheat.

Is there a way to bypass the compressor?

There is a way around this problem however; you can actually bypass the compressor all together with a different serpentine belt. Locate the serpentine belt at the front of the engine. It is a rubber belt that goes over all of the accessories of the engine.

Can a broken AC compressor cause the serpentine belt to snap?

If the AC clutch bearing seizes while the AC compressor is not operating, the belt can snap then as well. Replacing the serpentine belt tensioner and idler pulley at the same time as the belt is always a good idea. They wear out too!

Can a compressor lock up on an F-150?

Sometimes a problem with your air conditioning compressor can cause it to actually lock up. When this happens on your F-150, you may think you need to completely replace the compressor even though you don’t use it. There is a way around this problem however; you can actually bypass the compressor all together with a different serpentine belt.

Begin typing your search term above and press enter to search. Press ESC to cancel.

Back To Top