Table of Contents
- 1 Why is IC 74?
- 2 What is the meaning of 7400 Series?
- 3 What is the difference between the 7400 series and the 5400 series?
- 4 What is 74HC08?
- 5 How are IC named?
- 6 What is the function of pin 7 in 74xx?
- 7 Why is the fanout of CMOS gates frequency dependent?
- 8 What is 74HC32?
- 9 What does the 74xx series of ICS stand for?
- 10 When did Texas Instruments come out with the 7400 series?
- 11 What do the letters mean on a sn74ac244?
Why is IC 74?
Two digits, where “74” denotes a commercial temperature range device and “54” denotes a military temperature range. Historically, “64” denoted a short-lived series with an intermediate “industrial” temperature range.
What is the meaning of 7400 Series?
7400-series meaning Filters. The designation for more than 400 different digital logic integrated circuits, including NAND and NOR gates, inverters, buffers, decoders, frequency dividers, shift registers, flip-flops and binary adders.
Why it is called IC 7400?
7400 7402. mentions that it has dual inline package and 7 pins each side. 4 represents number of gates last two digits r meant for type code.
What is the difference between the 7400 series and the 5400 series?
What are the major differences between the 5400 and 7400 series of ICS? The 7400 series are an improvement over the original 5400s. The 5400 series are military grade and allow for a wider range of supply voltages and temperatures. The 5400 series are military grade and require tighter supply voltages and temperatures.
What is 74HC08?
The 74HC08; 74HCT08 is a quad 2-input AND gate. This enables the use of current limiting resistors to interface inputs to voltages in excess of V CC.
What is meant by 74LS?
The 74LS (Low-power Schottky) family (like the original) uses TTL (Transistor-Transistor Logic) circuitry which is fast but requires more power than later families. The 74HC family has High-speed CMOS circuitry, combining the speed of TTL with the very low power consumption of the 4000 series.
How are IC named?
A lot of IC names are rather arbitrary: typically a prefix indicating manufacturer or series, and a number. However, in the case of that particular chip (and discrete logic chips in general), the name tells you a lot. The “SN” is a prefix specific to TI. The “74” indicates a 7400 series logic devices.
What is the function of pin 7 in 74xx?
For most of the 7400 chips, pin 7 is the ground (GND) connection and pin 14 is the +5V power supply. There are exceptions like the 7490. 2.0V or higher signifies a logical “1”; 0.8V or lower signifies a logical “0”.
Who invented 7400 Series?
Texas Instruments
The following is a list of 7400-series digital logic integrated circuits. In the mid-1960s, the original 7400-series integrated circuits were introduced by Texas Instruments with the prefix “SN” to create the name SN74xx.
Why is the fanout of CMOS gates frequency dependent?
Why is the fan-out of CMOS gates frequency dependent? Explanation: Fan out is the measure of maximum number of inputs that a single logic gate output can drive. Actually power dissipation in CMOS circuits depends on clock frequency. As the frequency increases Pd also increases so fan-out depends on frequency.
What is 74HC32?
The 74HC32 is a 14 Pin Quad 2-Input OR Gate IC. The 74HC32 provides four independent 2-input OR gates with standard push-pull outputs. The device is designed for operation with a power supply range of 2.0V to 6.0V. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC.
Is 74HC08 a CMOS?
High−Performance Silicon−Gate CMOS The 74HC08 is identical in pinout to the LS08. The device inputs are compatible with Standard CMOS outputs; with pullup resistors, they are compatible with LSTTL outputs.
What does the 74xx series of ICS stand for?
The 74xx series of integrated circuits (IC), also known as monolithic IC, use very specific meanings for their letter designations. The lettering scheme provides engineers with a quick means to determine their compatibility with any project circuit.
When did Texas Instruments come out with the 7400 series?
In the mid-1960s, the original 7400-series integrated circuits were introduced by Texas Instruments with the prefix “SN” to create the name SN74xx. Due to the popularity of these parts, other manufacturers released pin-to-pin compatible logic devices and kept the 7400 sequence number as an aid to identification of compatible parts.
What does 74 stand for in CMOS part number?
A few alphabetic characters to designate a specific logic subfamily may immediately follow the 74 or 54 in the part number, e.g., 74LS74 for Low-power Schottky. Some CMOS parts such as 74HCT74 for High-speed CMOS with TTL-compatible input thresholds are functionally similar to the TTL part. Not all functions are available in all families.
What do the letters mean on a sn74ac244?
For example if you had a SN74AC244: The letters indicates that this is an AC family of chips — Advanced CMOS — based on CMOS technology. It can operate at 5 V. The same series listed in the 3.3 V categories uses less power and voltage. For either of the voltages the chip expects a CMOS level input and provides a CMOS level output.