Table of Contents
Why does my DVR not record the whole show?
If your DVR cuts off the end of a program, this is due to a delay in processing the signal through the cable system.
Why does my Spectrum DVR stop recording early?
The most common issue that many Spectrum DVR users encounter is not enough storage space. If the drive is full, your DVR will not be able to record unless you clear some space. Another possibility is that you’re trying to record “On Demand” programming, which is basically not allowed for the device.
How can I extend my DVR recording?
Press the INFO button on your remote control. Select Record Options, press OK. Go to STOP RECORDING, press OK….Choose how long to extend the recording once the show has ended, press OK:
- At scheduled end time.
- 5 minutes after.
- 15 minutes after.
- 30 minutes after.
- 1 hour after.
- 2 hours after.
- 3 hours after.
Why is my CCTV not recording?
If your CCTV camera is working fine but the DVR is not recording anything, common culprits include misconfiguration, lack of storage space, and failing DVR components. Don’t despair: modern DVR boxes are pretty friendly and easy to troubleshoot. Check that recording is enabled. It may sound obvious, but it happens.
How do I reset my DVR resolution?
To restore your recorder’s default display output: Plug your recorder, then press and hold the FN (function) button until the system restarts (see image below). After the reset, your recorder will display the lowest available resolution so that it becomes compatible with a variety of low-res monitors.
Why are my DVR recordings pixelated?
Check to see if all recordings on your DVR are pixelated or just ones from specific channels. If the pixelation is from one channel, check that channel live and see if it is still pixelating. If it is still pixelating, try rebooting your main set-top box.
How do I reset my Spectrum DVR?
Manually Reboot Your Receiver Unplug your Spectrum receiver for 60 seconds and then plug it back in. Make sure: Your cables are connected securely. The coax cable is connected to the cable outlet on the wall.
Can Spectrum DVR record more than 2 shows at once?
Spectrum’s DVR only holds 35 HD hours or 80 SD hours. According to Spectrum, a DVR that records 150 hours and can record six shows at once is available.
Why does my DVR not record an episode?
There can be several reasons why a series recording didn’t record an episode of a program: The series recording is set to record “first-run” episodes only, and the episode to be recorded was a re-run. You’ve run out of space on your DVR and you’ve set your DVR to not delete the oldest recordings to make room for new recordings.
What to do if you run out of space on your DVR?
You’ve run out of space on your DVR and you’ve set your DVR to not delete the oldest recordings to make room for new recordings. Tip: Ideally, you should try to ensure that you have at least 10% free space on your DVR’s hard drive when you record new programs.
How do I delete old shows from my DVR?
Once the recording space becomes full, the DVR automatically deletes the oldest shows to make space for new recordings. Select Menu from your remote control. Select Recorded TV. Choose a program that you want to keep and then select Save Until.
How do I record a program on my DVR?
Navigate to the program you want to record in the TV listings and highlight it. Press the Record button on your remote twice. The first button press records the program, the second button press records the TV series. Press the Menu button on your remote control. Select DVR. Select Create Recording.