Where is the tensioner pulley located?

Where is the tensioner pulley located?

The tensioner pulley is on the end of a spring-loaded tensioner. The accessory drive belt rides on the pulley while the spring-loaded portion of the assembly puts tension on the accessory drive belt to keep it tight enough so that it doesn’t slip on the rest of the pulleys.

Is the idler pulley and tensioner pulley the same?

The primary distinction between tensioners and idler pulleys is the presence of an adjustable bolt. Tensioners are positioned on the bolt through mounting. Idler pulleys are not mounted to an adjustable bolt. However, if bearings fail, tensioner and idler pulleys both require replacement.

How do I know if I need a new tensioner pulley?

1. Grinding or squeaking noise from the belts or tensioner. The most common symptom of a bad or failing drive belt tensioner is noise from the belts or tensioner. If the tensioner is loose the belts may squeak or squeal, especially when the engine is first started.

What sound does a bad tensioner pulley make?

When the tensioner or tensioner pulley fails, the loss of tension can cause the belt and pulleys to make high-pitched rattling or chirping noises. If the pulley bearing completely fails, it can also cause a squealing or even a grinding noise.

How do I loosen the tensioner on a serpentine belt?

Loosening the tensioner pulley is accomplished by pulling it in a direction that gives slack to the serpentine belt. This action enables the belt to be removed and for replacement or repair of motor parts. Most tensioner pulleys require a standard ratchet for loosening.

Can you drive with a bad tensioner pulley?

Driving with a bad belt tensioner is unsafe since the tensioner is meant to guarantee ample tension that powers accessories. Wear on the belt tensioner will eventually cause the belt to slip, generate loud noise, and also create an unsafe level of heat along the accessory pulleys.

How do you fix a loose tensioner pulley?

Turn the adjustment bolt on the side, top or bottom of the pulley counterclockwise with the ratchet and socket until the accessory belt is loose enough to remove. Tighten the tensioner pulley by turning the adjustment bolt clockwise with the ratchet and socket until the belt is tight.