Table of Contents
- 1 What year Dodge Ram 1500 parts are interchangeable?
- 2 What rear axle does my Ram 1500 have?
- 3 What year Dodge parts are interchangeable?
- 4 What gear ratio are in 2001 Dodge Ram 1500?
- 5 How do I identify a Dodge rear differential?
- 6 How many rear axle assembly options are there for Dodge Ram 1500?
- 7 How big is the Chrysler 9.25 rear axle?
What year Dodge Ram 1500 parts are interchangeable?
2002 and 2005 dodge rams have interchangeable parts with the 2004 dodge ram 1500.
What rear end does a 2001 Dodge 1500 have?
9 said, all 1994-2001 Ram 1500s came from the factory with a Dana 44 front axle and a Chrysler (Corporate) 9.25 rear axle.
What rear axle does my Ram 1500 have?
All all-new 2020 Ram 1500 models have a rear axle ratio of 3.21, except for the Rebel which has a 3.92 rear axle ratio.
How do I know what rear axle ratio My Ram 1500 has?
Start the truck and put it into neutral. Rotate the rear tire 2 times and count the number of times the drive shaft turns. Close to 4 times = 3.92. Close to 3 1/2 = 3.55 Close to 3 = 3.21.
What year Dodge parts are interchangeable?
2002 – 2008 Dodge Ram 1500’s are the same generation, so the parts should be interchangeable.
What generation is a 2001 Dodge Ram?
Third generation
Third generation (2002; DR/DH/D1/DC/DM)
| Third generation | |
|---|---|
| Ram 1500 Regular Cab | |
| Overview | |
| Production | July 24, 2001–2008 (1500) 2003–2009 (2500 & 3500) |
| Designer | Cliff Wilkins (1998) |
What gear ratio are in 2001 Dodge Ram 1500?
Details about 2001 Dodge Truck Ram 1500 Rear Axle Assembly, 4×2, 3.55 gear ratio, Anti-Spin.
How do I find out what rear axle I have in my Dodge Ram?
if you look at the sticker behind your grille on the inside of the hood it will list the axles and gear ratios. the rear axle should have a sticker on top of it right next to the driver side brake drum that will have the gear ratio. it will say either 3.55 or 3.92.
How do I identify a Dodge rear differential?
Without an ID tag, differentials are identified by the number of cover bolts, the distinctive shape of the cover, the number of ring gear bolts, and ring gear diameter. They can also be identified by whether the center section is an integral or dropout design.
How do I find out what gear ratio my Dodge Ram has?
Rotate the tire while counting the number of teeth in the large ring gear. Do the same for the small pinion gear in the front of the ring gear. Divide the smaller number into the larger number. This is the gear ratio.
How many rear axle assembly options are there for Dodge Ram 1500?
Attention! There are 6 choices for the 2001 Dodge RAM 1500 Rear Axle Assembly !!! Buy in monthly payments with Affirm on orders over $50. Learn more Have a question?
What kind of axle does a Dodge truck use?
A completely different ZF axle with little aftermarket support so far. The Chrysler 9.25″ rear axle is commonly found in Dodge cars and trucks. They use a 9.25″ ring gear and run 31 spline axle shafts.
How big is the Chrysler 9.25 rear axle?
The Chrysler 9.25″ is as stated above, a semifloating rear axle with 31 spline axleshafts. That puts it above everyone else’s standard half ton rear axles, and in the league with Ford and Chevy’s light duty 3/4 ton rear axles. 36’s and 37’s with a locker, moderate power, normal wheeling, and a smart right foot, you should be fine.
What kind of gears does a Chrysler rear axle use?
Drivetrain Parts. Axle Details The Chrysler 9.25″ rear axle is commonly found in Dodge cars and trucks. They use a 9.25″ ring gear and run 31 spline axle shafts. A front version of this axle was offered as well, however, it used reverse rotation gears and 33 spline axle shafts to the internal parts are not compatible.