What size is scant timber?

What size is scant timber?

Scant is traditionally more widely used in the Manchester and Lancashire regions. All four sides of the section are surfaced, with the finishing size being 42 x 699m. The corners of the section are squared, rather than rounded, with lengths of 2.4, 3.0 and 4.8m being available in most Howarth branches.

What’s the difference between CLS and C16 timber?

The CLS timber falls into the easy-edge C16 timber. The easy-edge timber is usually graded as standard C16 timber, but it is smoother and machine-finished making it suitable for a wide range of construction jobs. The easy-edge CLS wood timber is widely used in framing.

What is scant board?

When I was working in “gyppo” mills in Oregon- 1970s-’80s- “scant-sawn” referred to lumber that included a bit of the arc of the outside of the log, so that the particular board in question didn’t offer a full rectangular profile (usually at one end, only), but provided enough of a bearing surface to function in most …

Can CLS timber be used outside?

CLS timber should only be used outside if it has been treated, in order to ensure it is suitably resistant to external climate conditions that can cause issues such as rot and decay.

What is the difference between scant and CLS?

“CLS is more usually used for internal work such as partitioning or boxing in areas. Scant is an offshoot of CLS, used for similar situations, but has a smaller finished size.

What size is 4X2 CLS?

47X100mm (4X2″) Sawn Treated, C24 Graded & Regularised Timber. 47x100mm is also commonly known as 4×2 inch, although the actual finished dimensions for this product are 45x95mm.

Is C16 timber OK for decking?

Softwood with a strength class rating of C16 is considered the minimum standard for decks above 600mm in height and is a requirement of building regulations for such raised level structures.

What does the word scant?

1 : to provide an incomplete supply of. 2 : to make small, narrow, or meager. 3 : to give scant attention to : slight. 4 : to provide with a meager or inadequate portion or supply : stint.

What is CLS timber stand for?

Canadian Lumber Size
CLS Timber – “Canadian Lumber Size” or CLS is finished on all sides giving a smaller cross-section than traditional sawn timber. Originating in the Canadian market, hence the name it is mainly used for timber frame home construction and for internal and partition walls.

What does carcassing timber mean?

The phrase carcassing is normally used to refer to timbers processed for use in structural applications, for example roof battens, floor joists and studwork for partitioned walls. Sydenhams have available a wide range of sizes and lengths of timber that can be strength graded and treated to your requirements.

What size is C16 timber?

Kiln dried C16 is generally recommended for most applications if the correct spans are used and is mainly used internally for floor and roof joists. Lengths commonly available are 3.0, 3.6, 4.2 and 4.8 meter.

Is 4×2 OK for decking?

4 x 2 Timber Rail / Joist These decking joists are the most common sized framing timber for decking. They provide a solid structure for fixing your decking boards too. When making your decking frame you should use a 400mm spacing between your timber joists.

What kind of wood is scant timber used for?

I have investigated “Scant” timber; scant timber is imported from Canada and Europe and is used for internal studding, partitions and framing. Scant timber is produced from kiln dried spruce (whitewood), planed and finished with eased edges to precise tolerances and is graded C16.

What’s the difference between scant, CLS, and scant?

Most of today’s carcassing is regularised, which means it’s be planed to give a better finish and easier handling and consistent dimensions.” “CLS is more usually used for internal work such as partitioning or boxing in areas. Scant is an offshoot of CLS, used for similar situations, but has a smaller finished size.

How big is a piece of CLS timber?

The finished size of a 50 x 75mm piece of CLS timber is 38 x 63mm. The most commonly available stock lengths of CLS timber are 2.4m and 4.8m with some branches carrying the additional 3.0m length. As with the Scant, the best-quality of CLS timber is important from Sweden, Denmark, and Germany, as well as the Baltic regions and Canada.

What’s the difference between sawn and par timber?

The PAR/PSE and SAWN timbers are as I understand it, the same thing – SAWN is just PAR that hasn’t been planed. The cost is different as you pay for the planning process of the timber – but fundamentally they are the same timber. Sawn and PAR are better than scant in terms of straightness, defects, fibre structure and workability.