What questions should I ask a civil engineer?

What questions should I ask a civil engineer?

8 Civil Engineering Interview Questions and Answers

  • Can you describe what a projection line is?
  • Can you list out the various steps involved in the concreting process?
  • List out the reinforcements that are used in the process of prestressing.
  • How would you describe the soundness of cement?
  • Explain Fatigue.

Which metal is used for structural purposes?

Steel is an alloy of iron and a number of other elements, mainly carbon, that has a high tensile strength and relatively low cost and is used for structural and other applications in the construction industry.

Which method is mainly adopted?

Q. Which method is mainly adopted for design of steel structures as per IS code?
B. working stress method
C. ultimate load method
D. earthquake load method
Answer» a. limit state method

Which of following is NOT advantage of steel?

2. Which of the following is a disadvantage of Steel? Explanation: Steel has high strength per unit mass, highly durable, and is reusable. But steel is poor in fire and corrosion resistance, it needs to be protected.

What are the most common interview questions?

Your Ultimate Guide to Answering the Most Common Interview Questions

  • Tell Me About Yourself.
  • How Did You Hear About This Position?
  • Why Do You Want to Work at This Company?
  • Why Do You Want This Job?
  • Why Should We Hire You?
  • What Can You Bring to the Company?
  • What Are Your Greatest Strengths?

What are the technical questions asked in interview?

Here some Technical Interview Questions and Answers for Freshers

  • What is Artificial Intelligence?
  • Do you have any idea why programming languages exist?
  • What is the full form of SDLC?
  • Name some popular operating systems.
  • If you have to learn a new programming language for this job, what will you do?

What is the cause of metal rusting?

Rust is the result of a natural process where the iron in metals comes into contact with oxygen and water, causing it to corrode and deteriorate. When they combine, it is called oxidation and the chemical reaction produced causes ferric oxide to form – rust.

Why iron is used in construction?

Iron is used in construction of bridges and houses because it is capable of lifting the weight of different things at one time. We know that iron is a strong, hard and tough metal, hence it has high resisting power. So, it can resist high load, stress and strain.

What is the difference between end and edge distance?

Explanation: Edge distance is distance at right angles to the direction of stress from centre of hole to adjacent edge. End distance is distance in the direction of stress from centre of hole to end of element.

What is static theorem?

Explanation: The static method represents the lower limit to the true ultimate load and has maximum factor of safety. The theorem satisfies equilibrium and yield conditions. Explanation: Load computed on basis of this mechanism will always be greater than or at least equal to true ultimate load.

What is the carbon in steel?

Overview of Carbon Steel Most types of steel have a relatively low carbon content of about 0.05% to 0.3%. In comparison, carbon steel has a carbon content of up to 2.5%. Two-and-a-half percent carbon may sound insignificant, but it introduces several attractive benefits that aren’t found elsewhere.

Why is chromium added to steel?

Chromium (Cr): Chromium is added to steel to increase resistance to oxidation. This resistance increases as more chromium is added. ‘Stainless Steels have a minimum of 10.5% Chromium (traditionally 11 or 12%).

What to expect in a civil management interview?

Usually, civil management interviews are more technical in nature, therefore insights about the field of engineering is a must. This shall brighten your chances to answer questions in a much confident way. It’s always considered as a part of professional etiquettes to be well-groomed while applying for a job.

How are alloys made in the civil engineering field?

Alloys are made using a classic method of hot press usage. This includes rolling a hot metal base in an allowing metal powder drum. Then hot spraying procedure is performed on it, galvanized and so on. Depending on the requirement, molten base metal is also added with small portions of alloying materials. 11) What do you understand by segregation?

What do you need to know about metallurgy?

Metallurgy is the study of the physical and chemical composition of metallic elements. This study is divided into physical metallurgy, extractive metallurgy and mineral processing. Metals are… Those features or characteristics of metal that make it useful and distinctive from all others.

What should I look for in a civil engineer?

According to me, Civil engineer should be motivated, should have an analytic bent of mind, technically expertise is a must, creative, time management should be on point & should possess management skills. All these attributes together lay a perfect foundation for a succesful career in civil engineering.

Begin typing your search term above and press enter to search. Press ESC to cancel.

Back To Top