What is the best thickness for an inground pool liner?

What is the best thickness for an inground pool liner?

Many professional builders actually prefer 20mil liners because they have more elasticity which helps them fit better in some cases. Thicker liners tend to be less pliable and much heavier which can make the installation more difficult. A proper fitting 20 mil liner will outlast an improper fitting thicker liner.

What’s the best gauge for a pool liner?

The standard gauge for vinyl swimming pool liners for in-ground pools is 20 gauge, or 0.46 millimeters. A 20 gauge vinyl swimming pool liner typically comes with a 15-year warranty.

Which is thicker 20 mil or 25 gauge?

25 units – A 25 Gauge liner is 0.0223 inches thick. A 25 MIL liner is 0.0250 inches thick or approximately 12% thicker than a 20 Gauge liner.

Does thickness of pool liner matter?

Ultimately, the decision on the thickness of vinyl liner to buy is a matter of preference, but it will stay with you for up to 10 years (and as little as 5) so it’s good to consider all the factors. A thicker inground pool vinyl liner will be able to withstand more impact and is more resistant to punctures.

How many mils should a pool liner be?

To start, vinyl pool liners are usually 20, 27, 28, or 30 mils thick. The decision on whether or not to upgrade the thickness is yours—but keep in mind that this detail that will be with you for 5-9 years.

How long will a 30 mil pool liner last?

The typical lifespan of a vinyl liner is anywhere from 15-20 years and where your liner falls in that range depends, most crucially, upon your proper maintenance of the pool’s chemistry.

How many mils is a 20 gauge pool liner?

As it pertains to Vinyl Pool Liners They are both loosely measurements of the liner thickness. A liner that is advertised as a 20 mil usually has a 20 mil bottom and a 15 mil sidewall. A 20 gauge liner means that the liner has a 20 mil bottom and a 20 mil sidewall.

Whats the difference between mil and gauge?

A “mil” is 1/1000th of an inch. Gauge is (100) x (mils), so for example 0.3 mils = 30 gauge. To go from mils to microns, you multiply mils x 25.4.

How strong is a pool liner?

20 mil liners are proven to stretch perfectly against tight corners and conform to the curves of a shaped pool. Minimising opportunity for punctures or drying out. They are also strong enough to withstand the weight of the water.

How long should above ground pool liner last?

The average above-ground pool liner will last 6–10 years. Liner warranties may last 25 to 30 years, but they’re extremely prorated.

How thick should a pool liner be?

Is 27 mil pool liner good?

27 mil liner and Thicker: The Good 27 mil liners may be a good choice for your swimming pool if you have poor floors or walls. Example: If you are in need of covering up an old concrete swimming pool, it may be in your best interest to use the thicker liners.

What is the best thickness for a pool liner?

The Thickness of Pool Liners Pool liners are usually measured in mm, and the recommended thickness for an inground pool liner is 0.75 mm. For an above ground pool, 0.5 mm is the recommended thickness.

What is the thickest above ground pool liner?

Doughboy pool liners are the thickest on the above ground pool market, some measuring in at a dense 20 mil thickness, which is as thick as an in ground pool liner.

How thick are pool liners?

As for thickness, liners come in varying thicknesses such as 20 mil or 27 mil. The “mil” is a unit of thickness used in the swimming pool liner industry. The larger the mil number, the thicker the liner.