# What is C35 concrete mix ratio?

## What is C35 concrete mix ratio?

0.55
The C35 mix has a water-cement ratio of 0.55, and a cubic metre might comprise of 950kg of stones, 900kg of sharp sand, 200kg of blended cement, 110l of water (which is actually less by volume than in the waterproof concrete) and a small amount of WRA.

What is mix ratio for M35?

From combined gradation of Coarse aggregates it has been found out that the proportion of 53:47 of 20 mm & 10 mm aggregates produces the best gradation as per IS: 383. To obtain slump in the range of 150-190 mm water reducing admixture brand SP430 from Fosroc with a dose of 0.3 % by weight of Cement shall be used.

### What is M35 concrete mix design?

Mix proportioning for a concrete of M35 grade is given in A·I to A-ll. s = standard deviation. From Table I of IS 10262:2009, Standard Deviation, s = 5 N/mm2. Therefore, target strength = 35 + 1.65 x 5 = 43.25 N/mm2.

What is M35?

Cobalt High Speed Steels (HSS) M35 is also known as Cobalt Steel, HSSE or HSS-E. M42 is a molybdenum-series high-speed steel alloy with an additional 8% cobalt.

#### What is C10 concrete mix ratio?

For nominal mix, ratio of C10 concrete grade is 1:3:6 by volume, in which one part of Portland stone cement mixed with 3 part of fine aggregate/sand and 6 part of coarse aggregate with required quantity of water to reach compressive strength 10 Newton per square millimetre (N/mm2) or 10MPa at 28 days curing of a …

What is C20 concrete mix ratio?

The appropriate ratio for C20 includes the following: Cement – 1 part. Sand (fine aggregate) – 2 parts. Gravel (coarse aggregate) – 4 parts.

## What is M40 concrete mix ratio?

M40 Grade Ready Mix Concrete, for Construction, Packaging Size: 6 Cubic Meter

Packaging Size 6 Cubic Meter
Compressive Strength 40 MPa (After 28 Days)
Material Cement, Water, Aggregates, Sand, Admixture
Concrete Grade Mix Ratio 1 Ratio 1.3 Ratio 2.6 (Cement, Water, Aggregates)

What is the mix ratio of grade 30 concrete?

Different types of concrete grades and their uses

Concrete Grade Mix Ratio (cement : sand : aggregates) Compressive Strength
M25 1 : 1 : 2 25 MPa
M30 Design Mix 30 MPa
M35 Design Mix 35 MPa

### What is the ratio of M25 grade concrete?

1 : 1 : 2
Different types of concrete grades and their uses

Concrete Grade Mix Ratio (cement : sand : aggregates) Compressive Strength
M25 1 : 1 : 2 3625 psi
M30 Design Mix 4350 psi
M35 Design Mix 5075 psi
M40 Design Mix 5800 psi

What is 35 MPa concrete used for?

Tech-Mix® Pre-Mixed 35 MPa Concrete is a well-balanced superior mix of Portland cement, stone and sand. This mix is ideal for work requiring concrete with a thickness of 5 cm (2”) or more. Clean surface to be repaired must be free of foreign matter.

#### What is M in M30 concrete?

∴ In the designation of a concrete mix, the letter ‘M’ and the number stands for Mix and characteristic compressive strength of 150 mm cube at 28 days. ∴ The M 30 grade of concrete means the concrete mix which attains 28 day strength (characteristics) as 30 MPa or 30 N/mm2. Download Soln PDF. Share on Whatsapp.

What is the ratio of M10 grade concrete?

1 : 3 : 6
Different types of concrete grades and their uses

Concrete Grade Mix Ratio (cement : sand : aggregates) Compressive Strength
M10 1 : 3 : 6 10 MPa
M15 1 : 2 : 4 15 MPa
M20 1 : 1.5 : 3 20 MPa

## How to calculate mix ratio for M35 grade concrete?

Concrete Mix Proportions The Mix Ratio of M35 as obtained is 1 : 2.32 : 3.26 (Cement : Fine aggregate : Coarse aggregate) This is the procedure for mx design calculation of M35 grade concrete. Also, check out our posts of other mix design calculations below: Mix Design Calculation for M25 Grade concrete.

What should water content be for M35 concrete?

Select Water Cement Ratio = 0.43 for concrete grade M35 (From Fig 2. of I.S. 10262- 1982) Select Water Content = 172 Kg (From IS: 10262 for 20 mm nominal size of aggregates Maximum Water Content = 186 Kg/ M 3)

### What does the m stand for in concrete grade?

Concrete grades are denoted by M10, M20, M30 according to their compressive strength. The “M” denotes Mix design of concrete followed by the compressive strength number in N/mm2 “Mix” is the respective ingredient proportions which are Cement: Sand: Aggregate Or Cement: Fine Aggregate: Coarse Aggregate.

What are the properties of M30 grade concrete?

PROPERTIES OF THE M30 GRADE CONCRETE: M30 concrete is a mix concrete archived at most after 28 days of curing.M30 grade gets specifically designed to file a minimum compressive of 30 MPa approx. 4400 PSI in 28 days. Usually, with a nominal mix in which the proportion of cement, sand, and aggregates are in code.

Begin typing your search term above and press enter to search. Press ESC to cancel.