What happened to Sligh?

What happened to Sligh?

Sligh Furniture Co. is phasing out of its Holland manufacturing and its clock business by the end of 2005.

Where is the model number on a Sligh grandfather clock?

*The Model number for a Sligh clock is generally found on a sticker or brass plate attached to the inside of the front door or a sticker attached to the upper inside back of the clock which can be seen when you open the upper left hand side door. The model number starts with a 4-digit number such as 0824 or 0929.

How do you wind a Sligh wall clock?

To wind the Grandfather clock, insert the winding crank into each of the holes in the dial. Turn the crank in a clockwise direction. The Grandfather clock is equipped with an automatic limit device, which prevents weights from being raised too far. When winding, take extra care to prevent cables from crossing.

Is Sligh clocks still in business?

Sligh ceased all clock manufacturing in 2005, but they remain a high end manufacturer of furniture products. All Sligh mantle and wall clocks are repaired in our national service center location.

Where are Sligh clocks made?

Holland, Michigan
Sligh products were made in Holland, Michigan and were the highest quality contemporary clocks made in the USA. They were known for their high quality cabinetry and unparalleled sound.

Are Sligh grandfather clocks still made?

Sligh products were made in Holland, Michigan and were the highest quality contemporary clocks made in the USA. They were known for their high quality cabinetry and unparalleled sound. Sligh ceased all clock manufacturing in 2005, but they remain a high end manufacturer of furniture products.

How much does a Sligh grandfather clock weigh?

100 to 200 pounds
Grandfather Clocks weigh anywhere from 100 to 200 pounds and require special attention when moving them from one place to another.

How do you adjust the speed of a pendulum clock?

Regulating the clock — Pendulum Nut: The clock can be made to go faster or slower by means of the nut at the bottom of the pendulum. Turning the front of the nut to the right speeds up the clock, and turning it to the left slows it down (in other words move the nut up to speed up, or down to slow down).

How do you fix an overwound clock?

To rid the timepiece of lint & dust, you can spray it with compressed air after the initial cleaning. You can also apply small amounts of clock cleaning fluid, which should be available to find online with a bristle brush if required, however most find that warm water may tackle the job just as well.

Where do you find the model number on a Sligh clock?

*The Model number for a Sligh clock is generally found on a sticker or brass plate attached to the inside of the front door or a sticker attached to the upper inside back of the clock which can be seen when you open the upper left hand side door. The model number starts with a 4-digit number such as 0824 or 0929.

What kind of clock is in a Sligh case?

SLIGH OAK CASE BRACKET CLOCK: Oak case with SLIGH OAK CASE BRACKET CLOCK: Oak case with burl accents, brass handle, fluted 3/4 column stiles on front door, carved base.. Mixed metal dial marked CONTEMPORARY CHERRYWOOD TALL-CASE CLOCK , CONTEMPORARY CHERRYWOOD TALL-CASE CLOCK , 20th century, case by Sligh Co.; clock works made in Germany.

When did Sligh clock factory stop making clocks?

They were known for their high quality cabinetry and unparalleled sound. Sligh ceased all clock manufacturing in 2005, but they remain a high end manufacturer of furniture products. All Sligh mantle and wall clocks are repaired in our national service center location.

How tall is a Sligh grandfather clock in inches?

Majestic in appearance, each one stands alone in clock cabinetry and skilled clock movement. These include: Shelbourne 0997-4-HA: With measurements of 94 1/2 inches high x 28 inches wide x 16 inches long, this Sligh clock is made from hardwood solids. The beveled glass and antique brass moon dial and pendulum create a stately design.