Table of Contents
What engine was in an International 766?
International Harvester 766 Engine
| Engine Detail | |
|---|---|
| International Harvester C291 | |
| liquid-cooled | |
| Displacement: | 291 ci 4.8 L |
| Bore/Stroke: | 3.75×4.39 inches 95 x 112 mm |
How much horsepower does a 884 International have?
International Harvester 884
| International Harvester 884 Power | |
|---|---|
| Drawbar (claimed): | 65.4 hp 48.8 kW |
| PTO (claimed): | 72.9 hp 54.4 kW |
| Drawbar (tested): | 63.97 hp 47.7 kW |
| PTO (tested): | 72.91 hp 54.4 kW |
How much horsepower does a 806 International have?
Farmall 806
| Farmall 806 Power | |
|---|---|
| Engine (gross): | 110 hp 82.0 kW |
| Drawbar (claimed): | 84 hp 62.6 kW |
| PTO (claimed): | 94.5 hp 70.5 kW |
| Drawbar (tested): | 84.77 hp 63.2 kW |
How much horsepower does a 1456 International have?
International Harvester 1456
| International Harvester 1456 Power | |
|---|---|
| PTO (claimed): | 130 hp 96.9 kW |
| Drawbar (tested): | 114.69 hp 85.5 kW |
| PTO (tested): | 131.1 hp 97.8 kW |
| power test details … |
How many horsepower is a 1566 International?
International Harvester 1566
| International Harvester 1566 Power | |
|---|---|
| Drawbar (claimed): | 140 hp 104.4 kW |
| PTO (claimed): | 161 hp 120.1 kW |
How much horsepower does a 756 International have?
International Harvester 756
| International Harvester 756 Power | |
|---|---|
| PTO (claimed): | 76.5 hp 57.0 kW |
What year did the 806 international come out?
1963
The Farmall 806 and 706 were introduced in 1963, with production running to 1976 and 1967 respectively…..Farmall 06 series tractors.
| Farmall 806 | |
|---|---|
| Manufacturer | International Harvester |
| Production | 1963-1976 |
| Length | 161 inches (410 cm) |
| Width | 110 inches (280 cm) |
How many horsepower is a 986 International tractor?
International Harvester 986
| International Harvester 986 Power | |
|---|---|
| Drawbar (tested): | 90.15 hp 67.2 kW |
| PTO (tested): | 105.68 hp 78.8 kW |
| power test details … |
What engine is in a 1456 International tractor?
The following data is from the 1456 listing….Farmall 1456.
| Farmall 1456 Engine | |
|---|---|
| International Harvester 6.7L 6-cyl diesel | |
| Fuel tank: | 42 gal 159.0 L |
| 40 gal 151.4 L (optional auxiliary tank) | |
| Engine details … |
How many horsepower is a 1586 International tractor?
International Harvester 1586
| International Harvester 1586 Power | |
|---|---|
| Drawbar (tested): | 134.94 hp 100.6 kW |
| PTO (tested): | 161.55 hp 120.5 kW |
| power test details … |
How much does a 1466 international weight?
International Harvester 1466
| Dimensions & Tires | |
|---|---|
| Wheelbase: | 105 inches 266 cm |
| Weight: | 13,480 lbs 6114 kg |
| Front tire: | 11L-15 |
| Rear tire: | 18.4-38 |
Is an 806 A good tractor?
The Farmall 806 is a great buy – check this model out if you’re looking for lots of a power at a low price. The Farmall (row-crop) and International (standard) versions of this tractor are some of the best tractors ever produced by IH. The 806 is a full-featured, modern tractor.
When was the International Harvester 766 tractor made?
The International Harvester 766 is a 2WD row-crop tractor from the 66 series. This tractor was manufactured by International Harvester in Rock Island, Illinois, USA from 1971 to 1976.
What kind of compression ratio does International Harvester 766 have?
The compression ratio rating is 17.0:1. The International Harvester 766 is equipped with hydrostatic power steering, hydraulic dry disc brakes, Open operator station or Cab (optional) and 140.0 liters (37 US gal, 30.8 Imp. gal) fuel tank.
How big is the engine on an International Harvester?
International Harvester C291. It is a 6.4 L, 6,407 cm 2, (391.0 cu·in) six-cylinder natural aspirated gasoline engine with 95.0 mm (3.74 in) of the cylinder bore and 112.0 mm (4.41 in) of the piston stroke. International Harvester D360.
Is the IH 766 big enough for a roll Baler?
A 766 should be plenty big enough for a 4X5 roll baler, I would be extremely concerned about using a 766 on a 5X6 baler on sidehills. That being said if the 766 (or 966 for that matter) has 18.4X34 drivers the drawbar height will be low enough that it can be an issue straddling windrows with a roll baler.