Table of Contents
How do you reset the tire pressure sensor on a GMC Canyon?
How To Reset TPMS Tire Pressure Sensor Light on GMC Canyon (2007-2021)
- Turn the ignition key to the “ON” position without starting the engine.
- Turn the exterior lamp switch from AUTO to OFF 4 times within 3 seconds.
- Activate the TPMS sensor.
How do I reset my air pressure switch?
Press the TPMS reset button and hold it until the light blinks three times, then release it. Start the car and let it run for 20 minutes to reset the sensor. You’ll usually find the tire pressure monitor reset button beneath the steering wheel. Check your user’s manual if you’re having trouble locating it.
What does SERV TPM mean on GMC Canyon?
Service Tire Pressure Monitor system
The serv TPM means “Service Tire Pressure Monitor system” The first thing that will need to be done is to have the module relearn the TPM wheel sensors. The vehicle may be confused as to the correct location of each tire pressure sensor. Whenever the tires are rotated this procedure has to be performed.
How do you sync a tire pressure sensor on a GMC?
Apply parking brake. Turn vehicle to ON/RUN. Push the trip odometer reset stem until Tire Pressure is displayed. Push and hold trip reset stem to begin the sensor matching process.
How do you reset the TPM on a 2012 Chevy Colorado?
2011-2012 Models Turn the ignition key to the “ON” position without starting the engine. Turn the exterior lamp switch from AUTO to OFF 4 times within 3 seconds. Start from the driver side front tire, place the Relearn Tool against the tire sidewall, near the valve stem. Then press the button to activate the TPMS …
What does it mean to service TPM?
Service Tire Pressure Monitor
Service TPM means “Service Tire Pressure Monitor” The first thing that will need done is to relearn the TPM.The vehicle sounds like it’s confused as to the correct location of tire pressure sensors.