How do you reset the service engine soon light on a Pontiac Grand Am?

How do you reset the service engine soon light on a Pontiac Grand Am?

How to Reset the Service Engine Soon Light on a Grand Am Turn the ignition switch on without starting the engine. Press the “Options” button on the instrument panel until the service light is displayed. Press the “Set/Reset” button to open the reset confirmation screen. Turn the ignition switch off.

How do you reset the service engine soon code?

Press and hold down the gas pedal for another 10 seconds. The service engine light should stop flashing. Turn the key in the ignition to the off position. The service engine soon light will now be turned off when you restart the engine.

How do you reset the service engine soon light on a 2000 Pontiac Bonneville?

Switch RUN/ON the ignition, don’t start the engine. Press & hold the OIL RESET button in the glove box for at least 6 seconds, but no more than 60 seconds. After 6 seconds, observe the CHANGE OIL SOON maintenance light flash 4 times before light goes off.

Will service engine soon light reset itself?

Your vehicle’s check engine light will will reset by itself once the issue or problem has been repaired; this is true for most models. If you are certain that you have resolved the issue that caused your check engine light to come on in the first place, then the light should reset itself after at least 20 cycles.

Why the service engine soon light is on?

A Service Engine Soon light typically illuminates in response to a minor engine/electrical issue. Some of these include a loose gas cap, low fluid levels, or a problem with the emissions system. Should anything not be operating as intended, such as something running too fast, too slow, too hot, or too cold.

How do you reset the oil light on a 2002 Pontiac Bonneville?

How To Reset Pontiac Bonneville Change Oil Life Light (2000-2005)

1. Turn the ignition key to the “ON” position.
2. Press the SELECT button repeatedly until you see Oil Life on the display.
3. Press the RESET button for several seconds.
4. Turn the ignition off and start the engine to verify the indicator has been reset.

How do you turn off check engine light with scanner?

Press the “erase/clear” button on your scanner, then turn off the key and disconnect it. Clearing any codes present will turn off your check engine light temporarily. After pressing “erase/clear” and waiting until you see a “no codes” message, you can turn off your vehicle and disconnect the scanner.

When to use service engine soon instead of check engine light?

Some manufacturers use the service engine soon light instead of the check engine light when there is just a minor problem with your car and not a severe problem. It could also mean that it is time for a scheduled service, such as oil or spark plug replacement.

What to do if your engine maintenance light goes out?

Check your engine control unit for any stored trouble codes. If you receive any codes, save them and try to get information about what they mean. If there are codes for emission problems that are not dangerous for your engine, you can try deleting the code to see if the engine maintenance light goes out.

Why does my check engine light not light up?

If your Check engine light is ON, the easiest way to diagnose this problem is to always check your trouble code memory with an OBD2 scanner. The check engine light will not light up if there is a scheduled service as the service engine soon light.

What to do if your car light is not working?

Solution: Start your vehicle and see if any lights are not working. Check the headlights with the high beams on and off. Check the turn signals and the flashers. Ask someone to check the brake lights while you step on the pedal, or back up near a wall where you can see them reflected in your mirror.