How do you reset the perform service on a 2009 Dodge diesel?

How do you reset the perform service on a 2009 Dodge diesel?

Press and release the brake pedal two times. Fully depress the accelerator pedal slowly two times within 10 seconds. Turn the ignition switch to the OFF/LOCK position. The message should now be erased.

What does perform service mean Cummins?

“PERFORM SERVICE” on a Cummins diesel means your crankcase filter needs to be changed.

How do you reset the service light on a 2008 Dodge Ram?

To reset the “Perform Service” indicator system (after performing the scheduled maintenance) refer to the following procedure:

1. Turn the ignition switch to the ON position (Do not start engine).
2. Press and release the brake pedal two times.
3. Fully depress the accelerator pedal slowly two times within 10 seconds.

How do you reset the computer on a Dodge Cummins?

Put the negative cable clamp back onto the negative battery terminal and tighten the nut with the end wrench. Put the key into the ignition and turn over the engine. Examine the instrument panel to make sure all service and warning lights have shut off. If so, the computer has been reset.

What does it mean when it says perform service?

What Does Perform Service Mean? Most of the time, this light refers to when you need to change your oil. Other car manufacturers have similar indicators where they let you know it is time to change the oil.

What does perform service mean on a 2016 Ram 2500?

PERFORM SERVICE INDICATOR- RESET the “Perform Service” message will display on the EVIC each time you turn the ignition switch to the ON/RUN position to indicate emission maintenance is required. NOTE: if the indicator message illumination when you start the vehicle, the “Perform Service” indicator did not reset.

How do you reset the service light on a Dodge Ram?

Why does my car keep saying perform service?

How to perform service message on Dodge Ram?

Perform Service message 1 Turn the ignition switch to the ON position (Do not start engine ). 2 Press and release the brake pedal two times. 3 Fully depress the accelerator pedal slowly two times within 10 seconds. 4 Turn the ignition switch to the OFF/LOCK position.

What to do if perform service indicator does not reset?

Turn the ignition switch to the OFF/LOCK position. NOTE: if the indicator message illumination when you start the vehicle, the “Perform Service” indicator did not reset. If necessary repeat this procedure.

What does perform service mean on a Cummins diesel?

“PERFORM SERVICE” on a Cummins diesel means your crankcase filter needs to be changed. “PERFORM SERVICE” on a Cummins diesel means your crankcase filter needs to be changed. Click to expand… Roger that.