How do you reset the check engine light on a Volvo 240?

How do you reset the check engine light on a Volvo 240?

DIY reset service/check engine light

  1. turn ignition key on, but do not start.
  2. disconnect the negative (-) battery cable.
  3. wait 3 minutes.
  4. turn ignition key off.
  5. start your car.

How do you turn off the check engine light on a Volvo?

Turn the Volvo’s ignition key to the “II” position in the ignition. Wait for the light on the diagnostic tool to stop flashing. The codes on your Volvo’s electronic control unit should be cleared at this point and the check engine light will reset itself.

How do you reset the code on a Volvo?

Hold down the button for 10 additional seconds, and all of the codes should clear. Turn the ignition off, wait 3 seconds and turn the ignition back to position one. Use the code reader once more and if the code is 111, you have successfully reset the error codes with the diagnostic tool on your Volvo 850.

How do you reset the check engine light on a Volvo 940?

RE: Check Engine Light reset

  1. key in I position.
  2. hold trip meter in.
  3. turn ignition to II position.
  4. wait until service icon flashes twice.
  5. release trip odometer button.

How do you reset the check engine light on a 2005 Volvo xc90?

How do you reset the service light on a Volvo 740?

When “SERVICE” light is illuminated, remove cap on face of instrument panel between clock and speedometer. Insert a thin bladed tool into cavity and press reset button (A). speedometer needle. To reset Service Reminder Indicator, turn ignition on with engine not running.

How do you reset the Check Engine light on a Volvo?

How to Reset a Volvo Check Engine Light. Turn the Volvo’s ignition key to the “II” position in the ignition. Wait for the light on the diagnostic tool to stop flashing. The codes on your Volvo’s electronic control unit should be cleared at this point and the check engine light will reset itself.

Why does my Volvo service light keep turning on?

As we previously mentioned, your Volvo service light can turn on due to faulty spark plugs or other mechanical issues. It is also possible that a component needs to be replaced, such as the catalytic converter.

Why is my Check Engine light not working?

The check engine light also indicates that an error code has been generated by the Volvo’s electronic control unit. These codes are stored in the control unit’s memory until you reset them. Once the underlying problem has been fixed, or maintenance has been done, you will need to reset the check engine light.

What kind of diagnostic tool does Volvo use?

OBD2 and OBD1 scanners are very beneficial diagnostic tools for Volvo vehicle. You can choose from a range of versions, including the iCarsofti906 or the Ancel AD310.

Begin typing your search term above and press enter to search. Press ESC to cancel.

Back To Top