Table of Contents
How do I reset my Jandy AquaPure?
Each time a flow sensor is unplugged and plugged back in again the computer inside the unit must be reset by turning the power ‘off’ and then ‘on’.
What does cell reversing mean on AquaPure?
AquaPure automatically cleans the Cell electrodes once every 3 hours by reversing polarity. This does not interrupt the production of Chlorine.
How do you clean AquaPure cells?
Add one pint of muriatic acid to two quarts of water in a bucket. Pour the solution into the cell so it begins to foam. Leave the solution in the cell until the foaming has stopped or until the solution has been in the cell for more than 30 minutes.
How do you clean Aquapure cells?
How do I reset my Jandy Aquapure 1400?
Turn off the system and unplug the little board and then reinstall it. Turn on the system, wait for about 5 minutes, and then hold the little white button for 5 seconds. This will calibrate the sensor.
What does no flow mean on a Jandy Pro Series?
The “No Flow” light indicates that the flow switch is not detecting sufficient water passing through. Check the following: cleaning the cell or the filter (see how to backwash a DE Filter or Clean a Cartridge Filter).
What does check AquaPure no flow?
I would like to remind everyone that if your AquaPure system is showing “No Flow”, with or without any other error codes, your system IS NOT making chlorine. Don’t ignore it.
How do you clean AquaPure?
What does a service code on a Jandy aquapure mean?
If you have a Jandy AquaPure 700 or 1400 chlorinator, there’s a chance you may have come across a service code (or error code) before. A service code is a three digit number that appears on the display panel of an AquaPure Control Box, letting you know if your AquaPure unit is experiencing any problems.
What does Aqualink Rs do on Jandy aquapure?
AquaLink RS is controlling the AquaPure and desired output percentages. AquaLink RS is controlling the AquaPure and “Boost” is active. If you need more help understanding the AquaPure Error Codes, or need help fixing the issue, stop by a local Leslie’s Pool Supplies store and speak with a trained pool professional today.
Where do I find the service code on my aquapure?
A service code is a three digit number that appears on the display panel of an AquaPure Control Box, letting you know if your AquaPure unit is experiencing any problems. Service codes are fast, easy to read, and not only identify the problem, but direct you to an available solution.
What to do if your Jandy pool sensor is not working?
Jandy recommends that you contact a pool professional for service if you encounter a Level 2 code. Heated sensor element not heating. (Generates 172 code) Contact a pool professional. Flow sensor temperature sensor failure. (Generates 172 code – flow sensor service)