Table of Contents
How do I reset my HP Deskjet F4180 printer?
Unplug the power cord from the unit. Reconnect the power cord into the unit. When the lights begin to flash, press and hold the Power and Cancel buttons. When only the On/Resume light is flashing, release the buttons.
What does blinking light on HP printer mean?
The Power light blinks at a steady interval when the printer is processing a print job. If the Power light blinks fast, the ink cartridge door might be open, or the printer might be in an error state. If an error message displays on the computer screen, follow the on-screen messages to resolve the issue.
Why is my HP printer blinking and not printing?
How do I fix the flashing light on my HP printer?
Resetting the All-in-One might resolve the issue.
- With the printer turned on, disconnect the power cord from the rear of the printer.
- Unplug the power cord from the wall outlet.
- Wait at least 15 seconds.
- Plug the power cord back into the wall outlet.
- Reconnect the power cord to the printer.
- Turn the printer on.
How do I fix the blinking problem on my HP printer?
Solution one: Reset the All-in-One
- With the printer turned on, disconnect the power cord from the rear of the printer.
- Unplug the power cord from the wall outlet.
- Wait at least 15 seconds.
- Plug the power cord back into the wall outlet.
- Reconnect the power cord to the printer.
- Turn the printer on.
How do I fix my printer from blinking?
Perform Power Reset Make sure the printer is turned on, and disconnect the power cord from the rear of the printer. Now unplug the power cord from the wall outlet. Remove any USB cable that is connected to the printer to any other device including computer. Leave the printer in the off state for a few minutes.
What to do if printer is blinking?
1. Perform Power Reset
- Remove the Cartridges from the printer.
- Make sure the printer is turned on, and disconnect the power cord from the rear of the printer.
- Now unplug the power cord from the wall outlet.
- Remove any USB cable that is connected to the printer to any other device including computer.
Why is my printer ink light flashing?
If the Print Cartridge Status light begins to flash after a new print cartridge is installed, this is known as print cartridge rejection. Print cartridge rejection occurs when an unknown or incorrect print cartridge is installed in the printer.
What are the blinking lights on a HP DeskJet printer?
This document is for HP Deskjet F4135, F4140, F4150, F4172, F4175, F4180, F4185, F4188, F4190, and F4194 printers. The lights on the front of the printer indicate the printer status.
Why does my HP printer go into sleep mode?
The printer goes into sleep mode or standby mode. The printer is either too far away from the wireless router, or too close to it. The recommended distance between the printer and the router is 1.0 meter to 1.5 meters (3 ft to 5 ft). A firewall prevents the printer from accessing the computer and wireless network.
How do I drain the power from my HP printer?
Follow the steps below to do a printer power drain: With the printer turned on, disconnect the power cord from the rear of the printer and also unplug the power cord from the wall outlet. Remove USB cable, if present. Wait for 2-3 minutes, press and hold the power button on your printer for about 30 seconds to remove any additional charge.