How do I program my armitron sport watch?
The user manual for the Armitron All-Sport watch labels the top button on the left “A,” the bottom left as “B,” the top right button as “C” and the bottom right as “D.” Press and hold the “set” button, “A,” to set the time and date on your watch. This will cause the numbers on the face of the watch to flash.
How do I stop my armitron watch from beeping every hour?
- From Time Telling Mode, press and hold ‘A’ and press ‘C’ once.
- Press and hold ‘A’ and press ‘C’ once again to deactivate the Alarm.
- From Time Telling Mode, press and hold ‘A’ and press ‘B’ once.
- Press and hold ‘A’ and press ‘B’ once again to deactivate the Hourly Chime.
How do you set a armitron pro sport WR 165 watch?
Press the button on the top-left corner of the watch and the seconds will begin to flash. Press the button on the top right to change the minutes. Press the button on the bottom left to switch to the hours setting.
How do I set the time on my armitron Installite?
The Mode button is usually found on the bottom right side of your Armitron watch. When you press the mode button, the section that’s flashing on your screen will change. This way, you can easily switch between changing the hour, minutes, day, and date. Keep pressing Mode until you reach the value you need to change.
How do I set my sport watch?
Instructions for Sports Watches
- Set the time and date of your sports watch. The “Set” or “A” key found on the watch will allow you to change the time and date when pressed.
- Change modes.
- Activate the alarm.
- Use the “Start/Stop” key for the timer and chronograph modes.
- Press the backlight button.
How do I turn off the chime on my watch?
With most watches, it is a two-button combination. Press and hold the lower buttons on both side of the watch. With most sport watches, after holding the two lower buttons for several seconds, the screen will light up and alert you that the chime has been turned off.
How do I make my watch stop beeping?
Press the “C” button, located on your watch’s bottom-left corner, to disable the hourly time signal. When disabled, the hourly time signal icon (a bell) will not be visible on the screen.
How do I set the date on my armitron analog watch?
SETTING THE DAY/DATE If your watch has a date window only, pull the crown out to position B (see diagram). Rotate in either a clockwise or counter-clockwise direction (depending on watch style) to change the day or the date. Each turn of the crown will advance the day or date respectively.
How do I set the alarm on my armitron WR 165 foot?
Press the bottom button on the left-hand side of the watch twice to set the alarm. Press the top button on the left-hand side of the watch until the hours flash on the display. Press the bottom button on the left-hand side of the watch until the alarm number flashes.