How do I know what chain I need for my bike?

How do I know what chain I need for my bike?

For measuring the length of bicycle chain size, you need to do the following: Count the number of teeth on the biggest front sprocket and largest rear sprocket. You can find the numbers printed on the sprockets too. Next, you need to measure the distance between the crank bolt’s rear axle and midpoint.

How do I know if my bike is 10 or 11 speed?

Multiply the front gear number by the rear gear number to get the number of speeds. For example, if you have two front gears and five back gears, you have a 10-speed bike.

Are 6 7 8 speed chains the same?

5, 6, 7 and 8 speed chains Shimano, SRAM and Campagnolo all use the same chain with 8 speeds. Chain for 7 speeds is a bit wider – 7.3 mm, while a 6 speed one is substantially wider – 7.8 mm. Going further narrower, like a 10, or 11 speed chain on an 8 speed cassette can and often does work.

Are 11 and 12-speed chains the same?

This is accomplished by making the outer links of the chain thinner. Ultimately, single-speed chains are the strongest because they can be very thick since there’s only one cog at the back. The width of a 12-speed chain is roughly 5.25mm whereas that of an 11-speed chain is 5.62mm. That’s a 0.37mm difference.

How do I know my chain size?

To determine the pitch (chain size), you’ll need to measure the distance between any three consecutive rivets, then divide the result by 2. The rivets are the small, round pegs/studs that hold the chain segments together. Measure from the first to the third, then divide that number in half to get your chain pitch.

What is average cycling speed?

The majority of riders can average a speed of about 15 mph on a one hour ride. A good speed for a beginner is 10 mph, but you should be able to get to 15 mph pretty quickly. If you start training every once in a while, you could get your average up to 18 mph, but training on a regular basis could get you to 22 mph.

Are 9 and 10-speed chains compatible?

Condensed answer: In most cases, a 10-speed chain will operate just fine with a 9-speed cassette because it’s slim enough to move up and down the rear cogs without rubbing or skipping.

Can I use a 9 speed chain on a 7 speed cassette?

A chain wider than standard will not fit between adjacent sprockets of a freewheel or cassette, though it usually poses no problem in a derailerless system. Thus, you can use a “9-speed” chain with a 7-speed or 8-speed system, or a “10-speed” chain with a 9-speed system.

What size chain is bicycle chain?

The chain in use on modern bicycles has a 1⁄2 inch (12.7 mm) pitch, which is the distance from one pin center to another, ANSI standard #40, where the 4 in “#40” indicates the pitch of the chain in eighths of an inch; and is standard 606 (metric) #8, where the 8 indicates the pitch in sixteenths of an inch.

What is a 9 speed bike chain?

9 Speed Bike Chain. These 9 speed chains work with ALL 9 speed mountain and road bicycles on the market. The outer plating’s proprietary design gives the Connex 9 speed chain the highest shifting performance available and the high performance 9sX is made of high tensile stainless steel, which increases the life of the 9 speed chain by 20 percent.

How do you change a bicycle chain?

Steps of How to Change a Bicycle Chain Step One: Removing the Old Chain Step Two: Clean the cassette Step Three: Thread the new chain Step Four: Workout correct length Step Five: Cut to size Step Six: Push pin in place Step Seven: Work finished Step Eight: Test your chain

How do I install a new bike chain?

Installing a Bike Chain – Chain Routing. Route the new chain through the derailleurs and over the smallest gear in the back while just letting the chain fall to the inside of the front gears to keep tension at a minimum. Pass the chain on top of, then in front of the upper pulley, then straight down to the bottom pulley.

What is the speed of a bicycle?

Many beginning road cyclists ride at average speeds between 10 and 14 mph on the road. It’s certainly possible to sustain a higher speed, and some new riders who were already runners or some other type of endurance athlete may pedal at 15-18 mph or even higher. Jun 3 2019