How do I connect XBee modules?

How do I connect XBee modules?

Add XBee modules to XCTU

1. Connect two XBee modules to your computer using the USB cables.
2. Launch XCTU.
3. Click the Configuration working modes button .
4. Click the Discover radio modules button .
5. In the Discover radio devices dialog, select the serial ports where you want to look for XBee modules, and click Next.

How do I use Raspberry Pi with XBee?

Configuring XBee Modules using XCTU

1. Select the Serial port of the Explorer board/Arduino board and click on Next.
2. In the next window, set the USB port parameters as shown below and click on Finish.
3. Select the Discovered device and click on Add selected device.
4. Now, you can configure your XBee module in this window.

How does XBee communicate?

XBee devices communicate with each other over the air, sending and receiving wireless messages. However, they can communicate with intelligent devices via the serial interface. XBee devices transmit data coming from the serial input over the air, and they send anything received wirelessly to the serial output.

How does Arduino communicate with XBee?

XBee is an RF module mainly used as a radio communication transceiver and receiver. It is mesh communication protocols, also XBee supports peer-to-peer as well as point to multi-point network communications wirelessly with the speed of 250 kbits/s, to operate XBee you need a transmitter and a receiver.

What are XBee used for?

XBee is a module produced by Digi International mainly use as a radio communication transceiver and receiver. It is mesh communication protocols that sits on top of IEEE 802.15. 4 ZigBee standard. XBee supports peer-to-peer as well as point to multi-point network communications wirelessly with the speed of 250 kbits/s.

How do I set up XBee?

1. Step 1: Download X-CTU Software. The X-CTU software is free to download and provides a simple interface to configure and update your XBee transceivers.
2. Step 2: Put together your XBee breakout board.
3. Step 3: Configure 1st XBee as a coordinator.
4. Step 4: Configure 2nd XBee as Router.
5. Step 5: Test the configuration.

What is the difference between Zigbee and XBEE?

XBee is a family of radio modules and is a registered trademark of Digi International. Zigbee is a wireless communications protocol and a registered trademark of the Zigbee Alliance. Many people confuse these two names because both are involved in radio networking and have “Bee” in their branding.

What is XBEE Arduino?

Overview. The Xbee shield allows an Arduino board to communicate wirelessly using Zigbee. It is based on the Xbee module from MaxStream. The module can communicate up to 100 feet indoors or 300 feet outdoors (with line-of-sight). The shields breaks out each of the Xbee’s pins to a through-hole solder pad.

What is XBee module used for?

XBee – According to Digi “XBee modules are embedded solutions providing wireless end-point connectivity to devices. These modules use the IEEE 802.15. 4 networking protocol for fast point-to-multipoint or peer-to-peer networking.

What is XBee RF module?

Digi XBee is more than a module. It’s a complete ecosystem of RF modules, gateways, adapters, and software, all engineered to accelerate wireless development for global deployments. One socket allows you to connect to IoT networks around the globe.

How do I transfer data from Arduino to XBee?

For this, connect one end of the button to D5 of Arduino and the other end of the button to GND. Connect VCC (pin 1) of XBee module to 3.3V of Arduino Nano and GND (pin 10) of XBee to GND of Arduino Nano. These two connections make up for powering the transmitting side XBee module.

How do I connect XBee module to Arduino?

Just hook up the XBee module to the Explorer board and plug it with the laptop using USB cable. If you don’t have any converter or explorer board, then an Arduino board can be used as a USB to serial device which can easily communicate with the XBee and laptop.

How are XBee modules used in micro controllers?

The xBee – series 1 – modules take the 802.15.4 stack (the basis for Zigbee) and wrap it into a simple to use serial command set. These modules allow a very reliable and simple communication between micro controllers, computers or other systems by using just a serial port!

How do I connect my XBee to my computer?

With that, let’s configure our XBees. Download and install XCTU. Plug your first XBee into an Explorer module, and connect to your computer’s USB port via a USB cable. Open XCTU and click “Discover devices.” Select the port to be scanned. Your device should appear on the “Devices discovered” list.

Do you need chip antenna for XBee modules?

If you are looking to take advantage of the outdoor range options with the Xbee modules, the antenna plays an important role. The chip antenna is the standard option for your XBee module. It has the ‘worst’ performance of all the options in regards to range and sensitivity, but it requires no extra space in your project.

Can you connect an Arduino Uno to an XBee module?

Connect an XBee wireless module to an Arduino Uno using XCTU, and learn how to configure addresses and networks. The XBee module is one of the most popular wireless platforms around. It allows data to be passed over the air to another device hundreds of feet away.