How do I calculate dirt to fill a hole?

How do I calculate dirt to fill a hole?

Length in feet x Width in feet x Depth in feet (inches divided by 12). Take the total and divide by 27 (the amount of cubic feet in a yard). The final figure will be the estimated amount of cubic yards required.

How much dirt is in a hole 3ft by 6ft by 4ft?

As we know, volume of a hole is height * width * depth, the volume = 3ft x 6 ft x 4 ft = 72 cubic ft.

How much dirt is in a hole that is 2ft by 3ft?

Question: A) How much dirt is there in a hole that measures two feet by three feet by four feet (that is 2 feet x 3 feet x 4 feet). TO GET POINTS YOU MUST SHOW ANY CALUCATIONS YOU USED TO GET YOUR ANSWER. Dirt Volume = 2*3*4 = 24 Cubic feet.

How much dirt do I need to level my yard?

Calculate How Much Soil You Need

1. Convert the inches you need for soil depth into feet. Example: 3″ of soil (3″ ÷ 12″=.25′)
2. Multiply the length by the width by the depth of soil needed.
3. Divide the cubic feet by 27 (that’s the number of cubic feet in one cubic yard).
4. Round off your answer to 1.4 cubic yards.

How do you calculate soil volume?

To get the amount of cubic feet of soil instead of cubic yards, you would take you measurements in feet & multiply the length x width x depth = how many cubic feet of product you need to fill the volume of this garden or raised bed.

How do you calculate the volume of a round hole?

This formula is pi * radius squared * height = volume. This can predict the volume of a post hole, a golf hole or a hole you’re digging.

How much dirt is in a grave?

Today, individual states set the depth of a grave. Many say 18 inches of dirt, just a foot-and-a-half, on top of the casket lid or burial vault is fine. That’s not six feet down, it’s four feet.

How much soil is in a hole?

Calculate the volume of dirt needed to fill in the hole using pi (3.142) times the square of the radius times the depth. For this example, you would multiply 3.142 by the square of 30 by 30 to obtain the volume. This yields 3.142 times 900 inches times 30 inches, or 84,834 cubic inches.

How many 25L bags of soil do I need?

All of our soils and mulches are available to purchase by volume, weight or bag. There are 25 bags (40 litre) of mulch or bark per 1 cubic metre and 40 bags (25 litre) of soil per 1 cubic metre.

How much area does 25L of soil cover?

4 sq. ft.
Lawn soil, 25 L bag. Covers up to 4 sq. ft.

How much dirt does it take to raise 1 acre of 1 foot?

So, if you dig 1 foot deep over an acre, you get 43,560 cubic feet of dirt. If you dig 5 feet deep, then you have 5 times this amount of dirt.

How big of a hole do you need to fill with dirt?

Circular Area. Convert 84,834 cubic inches to cubic yards by dividing by 46,656 cubic inches. It will require 1.82 cubic yards of dirt to fill in the hole.

How many cubic yards of dirt to fill an inch?

Your result tells you how many cubic yards will fill one inch of depth. Applying that formula to the example above using 40 square feet, you would need .54 cubic yards: To give you a sense of volume, there are 27 cubic feet in one cubic yard (3′ x 3′ x 3′).

Is there a calculator for fill dirt?

Our fill calculator can help you figure out how much fill dirt you will need for your construction project. This cubic yard calculator works with top soil, mulch, gravel, dirt fill, clean fill, fill dirt.

How does the cubic yard fill calculator work?

This cubic yard calculator works with top soil, mulch, gravel, dirt fill, clean fill, fill dirt. This calculator is designed to give an approximate volume quantity for fill, gravel, rock or mulch to fill or cover a given area, either generally rectangular or generally round.