Can you hang curtains with nails instead of screws?

Can you hang curtains with nails instead of screws?

Yes they would, not as well though as screws. As long as the nails hit in to the wood stud on either side of the wood header in to the stud. Generally the studs are 1/2″ back from the surface of the drywall or 5/8″ if a fire rated wall. So 1.25 in. to 1.5 in.

Can you screw a curtain rod?

Measure the distance between the mounting brackets on the curtain rod you’re installing and make another mark on the wall that distance from the first one. Remove the bracket and drill a 1/4-inch hole on each mark. Insert a No. 8 plastic screw anchor into each hole.

Will no more nails hold a curtain pole?

Re: DOES NO MORE NAILS REALLY WORK? DA. No More Nails is not bad but there is no glue in the world that will stick up curtain poles because the substrate will give even if the glue doesn’t.

Can you hang curtain rods without drilling holes?

Dowels and Sticky Hooks And the beauty of using a sticky hook instead of drilling holes in the wall is that if you decide the curtains look too low or too high, you can move the rod and hooks without any damage.

How can I hang curtains without putting holes in the wall?

Here are five ways to hang curtains without damaging walls or window frames:

1. Use 3M Command Hooks.
2. Try Kwik-Hang Curtain Rod Brackets.
3. Use Tension Rods.
4. Get Creative With Coat Hooks.
5. Try Magnetic Rods on Metal Doors.

Do curtain rods need anchors?

You’ll need to use plastic wall anchors to provide proper support if you’re installing in drywall. Fasten the brackets to the walls using your drill or screwdriver. Hang the curtains and double-check to make sure your brackets are still secure. Open and close to check that they’re functioning properly before finishing.

How do you hang a curtain rod without nails?

There are several different methods for hanging your curtains without using nails or screws in your wall.

1. Tension rods are probably the easiest.
2. Magnetic curtain rods are available as are hangers that tap in behind your window frame.
3. Command hooks can work, too.
4. No-Drill Curtain Rod Brackets.
5. Velcro.

How do you attach a curtain rod to the wall?

Hold one of the mounting brackets against the wall on the first mark and mark the positions of the screw holes. Remove the bracket and drill a 1/4-inch hole on each mark.

What kind of curtain rod should I use?

A shorter curtain rod that has a length short enough to fit inside the trim of the window creates a streamlined appearance with the lines of the window frame being visible. If you are going inside the trim route, make sure to get easily extendable rods.

What’s the best way to hang curtains over a window?

There are many alternative ways to hang your curtains over blinds, including coat hooks, tension rods, command hooks, and suspended rods.

How do you attach a fishing rod to the wall?

Use a measuring tape to find the center of the rod if you need a third bracket to prevent sagging. Hook the third bracket on the rod, place it against the wall and mark the screw holes. Install anchors, then screw the bracket to the wall.