Table of Contents
- 1 Are torque converters interchangeable?
- 2 Will a 700R4 torque converter fit a th400?
- 3 Will a th400 bolt up to a 350?
- 4 Is a TH350 the same as a Turbo 350?
- 5 What replaced the TH400?
- 6 How much is a torque converter for a 350 Turbo transmission?
- 7 What’s the difference between a TH400 and TH350 torque converter?
- 8 Is the 454 torque converter dual drilled or dual drilled?
Are torque converters interchangeable?
Q: Torque converter interchange It is possible, but would have to be confirmed. If you have a defective torque converter, or you are rebuilding a transmission, it is NOT recommended to install a used torque converter or even re-use your torque converter.
Is a Turbo 350 transmission the same length as a Turbo 400?
Measure the transmission. The overall length of the TH-400 is 38 inches, while the overall length of the TH-350 is 33 5/8 inches, if both use the longest tail shafts available. The TH-400’s body is 25 inches and the TH-350’s body is 21 5/8 inches long.
Will a 700R4 torque converter fit a th400?
No it will not. The 700R4 has a lock up torque converter and the TH-400 does not.
How much is a torque converter for a 400 transmission?
Compare with similar items
| This item Turbo 350/400 Torque Converter 1800-2200 Stall by Transmission Depot Inc | TORCO TH350 Non-Lockup Stock Torque Converter 12″ Chevy – REMANUFACTURED | |
|---|---|---|
| Add to Cart | ||
| Customer Rating | (0) | 3.8 out of 5 stars (11) |
| Price | From $269.00 | $18999 |
| Sold By | Available from these sellers | Torque Converter |
Will a th400 bolt up to a 350?
You might be able to swap that B-O-P T-400 for a Chevy T-350. The T-350 is lighter and will offer less internal drag, so the swap would benefit you. A PowerGlide loses about 18 horsepower to parasitic drag, a T-350 comes in at about 38 horsepower and a T-400 requires about 45 horsepower.
How do you identify a torque converter?
Identification – Torque Converters
- Identifying Marks – any numbers, letters, paint stripes, paint dots, etc.
- Hub – the portion of the converter that is inserted into the pump and is located on the transmission side of the converter.
Is a TH350 the same as a Turbo 350?
The TH350 is an automatic shift, three-speed transmission. The Turbo 350 is the shortest and one of the strongest automatics that can be put into a Jeep.
How much longer is a 700R4 than a TH350?
Length And Weight The TH350’s case length is 21 5/8 inches. Depending on the tail shaft housing, its overall length can either be 27 5/8 or 30 5/8 inches. The 700R4’s case length is 23 3/8 inches and its overall length is 30 3/8 inches.
What replaced the TH400?
Registered. Been there done that, the 700 is probably the easiest swap, Torque converter and flexplate are different, trans cooler lines will require a little bending but will fit. Linkage will work as is, but you will not be able to pull down to 1st gear manually, drive shaft yoke is different.
Will a 700R4 torque converter fit a TH350?
In a word, NO. 7004r’s use a lockup converter. It’s a totally different converter than TH350 uses.
How much is a torque converter for a 350 Turbo transmission?
Compare with similar items
| This item Turbo 350/400 Torque Converter 2100-2500 Stall by Transmission Depot Inc | TORCO TH400 Torque Converter 2200-2500 Chevy High Stall Heavy Duty Non-Lockup – REMANUFACTURED | |
|---|---|---|
| Price | From $309.00 | $179.99$179.99 |
| Sold By | Available from these sellers | Torque Converter |
What is the fluid capacity of a TH400 transmission?
6
| Transmission Fluid Capacity | |
|---|---|
| Transmission (w/ Stock Pan) | # of Quarts |
| GM TH400 | 6 |
| GM Powerglide | 4 |
| GM 700R4/4L60E | 6 |
What’s the difference between a TH400 and TH350 torque converter?
You have discovered the difference in a stock TH350 and 400 converter.. LOL. A stock 400 is 13″ and a stock TH350 is 12″. They are interchangeable, if you use the 13″ converter in a TH350, be sure it clears the case. If you are doing a TH400 deal, use the TH350 converter… Be sure the flexplate is drilled for both patterns.
Can you choose the correct torque converter for your car?
Let’s face it, unless you have a lot of experience with torque converters, it’s nearly impossible to choose the correct one for any given application and predict with certainty how it will work in the car. When looking at all of the options available, how can you narrow all the choices down to the right one for your ride?
Is the 454 torque converter dual drilled or dual drilled?
Check the flexplate, nothing is more frustrating than removing a transmission because the flexplate holes arent big enough or the right pattern. A stock 454 flexplate will only have the larger pattern, due to the often used 6 bolt converter. Most aftermarket flexplates are dual drilled.
What happens if you remove stator on torque converter?
Remove the stator, and a torque converter will retain none of its torque multiplying capabilities.