How do I log into my Linksys access point?

How do I log into my Linksys access point?

Open a web browser, type 192.168. 1.252 in the Address bar and press [Enter]. Step 4: On the authentication window that will appear, enter the default username and password “admin” in both the Username and Password fields then click Log in.

How do I setup a Linksys wireless access point?

Configuring an Access Point as a wireless repeater

1. Access the router’s web-based setup page.
2. When the router’s web-based setup page opens, click Status then click Wireless.
3. Take note of the MAC Address.
4. Connect a computer to the access point.
5. Assign a static IP address on the computer.

How do I access WAP54G?

Connect to a Router

1. Connect the Linksys WAP54G device to your Internet modem using the Ethernet cable.
2. Open a Web browser and type “http://192.168.1.245” — without quotation marks — in the address bar.
3. Type “admin” — without quotation marks — in the password field.

How do I setup my Linksys wrt54g as an access point?

1. Plug your laptop or computer directly to the WRT54GS using an Ethernet cable.
2. Log in to the WRT54GS management interface by opening a Web browser and typing “192.168.
3. Click on the “Setup” tab and give the WRT54GS an IP address within the same subnet as your first wireless access point.

How do I log into my access point?

Open the web browser and type the IP address of the access point/extender (Default is 192.168. 1.1/192.168. 1.254/192.168. 0.254) into the address bar and then Press Enter.

How do I find the IP address of my Linksys access point?

Note the IP address of the “Default Gateway” entry listed on the sixth line below the “Ethernet adapter” header in the command line output. The “Default Gateway” IP address is the IP address of the Linksys access point.

How do I install an access point?

Work

1. Introduction.
2. 1Connect the Ethernet port of your cable modem or router to your wireless access point’s Internet (or WAN) port using an Ethernet network cable.
3. 2Connect your wireless access point to your computer using an Ethernet network cable.
4. 3Turn on your DSL or cable modem and wait about two minutes.

How do I use my Linksys router as a wifi extender?

Click Connectivity.

1. Click Internet Settings.
2. Click Edit.
3. Select Wireless Repeater.
4. Enter the main router or access point’s Network name (SSID), Network band and Security mode.
5. Click to save settings. Click Yes to continue.

How do I reset my Linksys WAP54G access point?

If the access point doesn’t reset, hold the reset button in for 20 seconds, keep the button depressed and unplug the access point for 20 seconds, and then plug in the access point and release the button.

How do I use my Linksys router as a WiFi extender?

How do I make my Linksys WRT54G a repeater?

You can turn the Linksys WRT54GS router into a repeater bridge by resetting the router, updating the firmware, setting a static IP address on your computer, changing the router settings then resetting the computer IP address. This task can be complex and time-consuming; only advanced users should try it.

Why do I need a wireless G access point?

To protect your data and privacy, the Wireless-G access point can encrypt all wireless transmissions. The MAC address filter lets you decide exactly who has access to your wireless network. Configuration is a snap with the Web browser-based configuration utility.

What does a Linksys wireless access point do?

Or add Access Points to two separate networks and create “cable-less cable” connectivity between them. Amazon.com Product Description The Linksys Wireless-G access point lets you connect Wireless-G (802.11g) or Wireless-B (802.11b) devices to your network.

Is the Linksys wireless G access point compatible with Windows XP?

Future-proof your wireless network with the Linksys Wireless-G access point. You’ll enjoy Wireless-B connectivity today, and be prepared for a high-speed Wireless-G tomorrow. The Linksys Wireless-G access point is compatible with Windows 95, 98, Me, NT 4.0, 2000, and XP.

Is the Cisco Linksys wap54g a good router?

The WAP54G provides a strong, excellent signal, very good on 3rd floor, and also good on 1st floor in our kitchen. One point to note: the download speed has been a little lower, like 6MB on the WAP54G repeater, instead of 12MB on the WRT54G router connection; upload speed seems the same on both.