How do you unlock a Ford Lock 13 4500?

How do you unlock a Ford Lock 13 4500?

04 fusion the radio is locked on 13 its a 4500 rds how do i

1. Drivers door open – leave open.
2. Ign. ON. – Use RED key only.
3. Radio ON.
4. Press and hold presets 1, 3 and 6.
5. Ign. OFF then back ON within 1 second.
6. Release presets 1, 3 and 6.
7. Radio OFF.
8. Ign. OFF.

What does it mean when a radio is locked?

A lockout code protects against radio theft. If a thief disconnects the radio, the code locks the radio up, rendering it useless. However, it’s not much of a safeguard because the thief usually doesn’t know that the code has been tripped until he powers up the radio after he has removed it from the vehicle.

How do I get my Ford radio code?

How To Find Your Ford Radio Code Online

1. Press and hold the preset buttons 1 & 6 or 2 & 6 then turn the unit on.
2. Let go of the preset buttons once the unit is powered up.
3. Look for the serial number beginning with V or M followed by six numbers.
4. If you have the serial number use this radio code search form.

How do I unlock my Ford radio code?

Ford Radio Code Entry Instructions

1. Firstly switch on the radio.
2. You Should See _ _ _ _.
3. Press 1 repeatedly for the first digit of your radio code.
4. Press 2 repeatedly for the second digit of your radio code.
5. Press 3 repeatedly for the third digit of your radio code.

Where do I find my Ford radio code?

How do I unlock my Ford Fiesta 4500?

My Fiesta radio is “Locked” The LOCKED status appears after you enter an incorrect code for ten times. To unlock it, turn the stereo switch to ON and hold button 6 for ten seconds. If it doesn’t work or you see LOCKED 13, that means the unit is permanently locked.

How do I unlock my Ford 6000cd radio?

After you reach the limit, the radio enters in “Locked” status. To reset it, hold button 6 for ten seconds. It will bring you another three attempts, but take care if you spend it too, the radio is going to be permanently locked with “Locked 13” message.

How do I find my Ford radio code?

How do I get a radio code for a Ford 3000?

Open the Ford radio decoder. Fill in radio’s serial number. Fill in radio’s security number too. Then select the year on production. Select the exact Ford car model too. Click on the decode button. Wait some time – now longer than ten minutes. Then you will have the Ford 3000 Traffic radio code on your device’s screen.

How to change lock10 to lock13 on Ford radio?

Once at 00:00 you can attempt your code once more. If incorrect you can repeat this procedure up to a total of 10 times. If LOCK10 appears after entering 10 incorrect codes, press and hold the number 6 button while turning on the radio to change from LOCK10 back to CODE. You then have 3 further attempts at the code before LOCK13 appears.

How can I get my Ford radio unlocked?

All Ford Radios Unlocked Instantly Completely free, fill in your serial number, enter your email address & use our Ford radio code generator to unlock your stereo. How To Get Your Ford Radio Code?

How do you get the radio code on a Ford Focus?

M & V serial numbers cover 95% of ford radios commonly in the Transit, Focus, Fiesta & KA radios have these serial numbers. Enter the radio code when you see four horizontal lines on the display screen. If you see the word wait, you need to leave the radio switched on for up to 1 hour this will allow the radio to reset.