Table of Contents
What does F93 mean?
F93. indicates error has been detected by the control. Most error codes are generated as a result of irregularities in the power supply or door lock mechanism failure. The error code. F93.
How do you fix f1 code on Kenmore oven?
The oven sensor should be disconnected and tested for resistance and compared with the “RTD” scale. You can try resetting the range by disconnecting it from the outlet or switching off the circuit breaker of the home for 10-20 minutes then restore the power.
How do I get my Kenmore oven to work?
Kenmore Elite Stove Delay Start
- Press “Cook Time.”
- Enter “50” using the numeric keys.
- Press “Start” to store this duration for the cook time (50 minutes).
- Press “Delay Start.”
- Enter “530” using the numeric keys.
- Press “Start” to store this time to start baking (5:30).
- Press “Bake.”
What does F93 mean on a Frigidaire oven?
The F93 error code indicates the max oven door lock time has been exceeded. If the oven door light checks good, I recommend replacing the oven door lock assembly.
What does F20 mean on a GE oven?
Most common GE error codes
| F0 | This code usually means that there is a problem with the keypanel. Most of the time, it means that the keypanel needs to be replaced. |
|---|---|
| F2 or F20 | For an unknown reason, oven temperature has exceeded a preset threshold. |
| F3 | This code usually means that the oven sensor needs to be replaced. |
How do I reset my Kenmore oven?
How to Reset a Kenmore Elite Stove Oven
- Press the “7” button on the Kenmore Elite keypad.
- Continue holding the “7” button for at least six seconds until a single beep sounds.
- Press the “Start” button on the keypad once. This will reset the oven back to the factory default settings.
How do I fix F1 error on my oven?
On some models it is possible that F1 could also be caused by a keypad problem. In this case it will specify in the tech sheet to power down the oven, disconnect the keypad then power the oven back on, wait for a few minutes to see if the error reappears. If the error reappears it is definitely the control board.
How do I fix F1 on my oven?
Oven Temperature Probe Press the “Probe” button on the keypad and use the keys to enter the desired cooking temperature. Push “Start” to reset the probe and begin cooking. If the F1 error code does not return, the problem is resolved and cooking should proceed normally.