What does stenter machine do?

What does stenter machine do?

A Stenter (sometimes called a Tenter) is a specialist oven used in the textile industry for drying and heat treating fabric after wet processing.

What is stenter finishing?

Stentering is a mechanical finishing process of textile. It is done for the stretching of fabric by the stenter machine. In other words we can say stentering is done for gripping the edges of a moving web to support the web during heating and stretching operations.

What is compactor machine in textile?

The compacting machine is a knitted fabric shrinkage control machine, which can compact the fabric in length wise direction, to provide over feed to the fabric while processing in presence of steam and able to control the shrinkage. In other words, this is a process of compacting the fabric in length ways direction.

What does a textile machine do?

Textile machines are used in the fabrication and processing of fabrics, textiles, and other woven and non-woven materials. They are used in processes such as spinning, weaving, warping, and dyeing. Textile equipment can be used to manufacture, dye, and finish materials such as fiber, yarn, and thread.

How does a stenter machine work?

Working procedure Continuous drying is done in a stenter frame by convection. Blowers impinge hot air on both the top and bottom of fabric as the fabric passes through the chamber of the machine. Its frames are equipped with an endless chain on each side to grip the fabric by both selvages as it enters chamber.

What is a calender machine?

calender, machine that has wide application in the finishing of textile fabrics, the production of vinyl plastic sheeting, rubber sheeting, coated fabrics, and the manufacture of paper. The number, arrangement, and type of rollers are the chief factors that determine how the calender functions.

What is compactor machine?

A compactor is a machine or mechanism used to reduce the size of material such as waste material or bio mass through compaction. A trash compactor is often used by a home or business to reduce the volume of trash it produces. Normally powered by hydraulics, compactors take many shapes and sizes.

What is compacting process?

The compacting process is the compressing of fine-sized powders between a roll compactor. Feed materials are then pressed together into compacts by roll compactors. The produced compacts are broken into granules and classified into desired particle size.

What is Mercerizing machine?

The mercerizing process for finishing fabrics made of cotton in a top-quality product. A higher dye pick-up as well as the silky luster is decisive for an elegant appearance of mercerized fabric such as outerwear, table linen and bed linen.

What is the difference between calendar and calender?

A calender is a series of hard pressure rollers used to finish or smooth a sheet of material such as paper, textiles, or plastics. Calender rolls are also used to form some types of plastic films and to apply coatings. A calendar is a system of organizing days.

How are stenter machines used in textile industry?

Stenter machine is electrical machines used in textile industry for stretching or stentering thin fabrics such as muslin. Stenter electrical machines are called as stenter hook. In stenter open compactor fabrics enter. Here Cotton fabric shrinks widthwise & weft are distorted due to bletching & dyeing process.

What kind of machine is a stenter hook?

Stenter electrical machines are called as stenter hook. In stenter open compactor fabrics enter. Here Cotton fabric shrinks widthwise & weft are distorted due to bletching & dyeing process. Heat setting is controled by the stenter for lycra fabric, synthetic and blended fabric.

How is the GSM of fabric controlled by stenter?

GSM of the fabric is controlled by stenter. Fabric is dried by the stentering process. Shrinkage property of the fabric is controlled. Curing treatment for resin, water repellent fabric is done by the stenter. Stenter Machine: I present a stenter machine profile for your consideration. Following points are needed to consider during buy a stenter.

How to check fabric width in stenter machine?

Width Check in Stenter Machine Process: Measure fabric width by using a measuring tape and compare it with the required width that is mentioned by production officer on the batch card or program. Design, Fabric Bow and Slant Check in Stenter Machine Process: Check the design, bowing and slanting of fabric at the delivery side.