Table of Contents
What does the white light mean on my Whirlpool dishwasher?
The Clean light is an indication that the dishwasher has been run and the dishes inside it are clean. Once the door is opened after the cycle is complete, the light will shut off.
How do I clear the error code on my Whirlpool dishwasher?
There’s a simple way to reset the blinking light of your dishwasher:
- Press the “Heated Dry” button. Then instantly press the “Normal” button.
- Press the “Heated Dry” button again. Then quickly followed by the “Normal” button. This will take the dishwasher into diagnostic mode/ and it will eventually reset.
Why are the lights blinking on my Whirlpool dishwasher?
A blinking Start/Resume light signifies an interruption in the cycle or start-up. It can occur if you leave the door open during the cycle or due to a power interruption. To fix it, restart your unit and ensure you firmly close the door within no more than three seconds of pressing the Start/Resume button.
Can you reset a Whirlpool dishwasher?
To reset the dishwasher control panel, it needs to be disconnected from the power source for one minute. If your dishwasher is plugged into an outlet, simply unplug the unit for one minute and then plug the unit back in.
How do you read a Whirlpool dishwasher code?
You need to count the number of times the clean light flashes to find out the error code on your Whirlpool dishwasher. As an example: If the clean light flashes 5 times followed by 2 flashes (5-2) then this error is showing the function code = “Door issue” and the problem code is “The door switch is in question”.
Is there a way to reset a Whirlpool dishwasher?
How do I fix the flashing light on my Whirlpool dishwasher?
How to Reset the Blinking Light on a Whirlpool Dishwasher
- Press the “Heated Dry” button, then quickly press the “Normal” button.
- Press the “Heated Dry” button again, and press the “Normal” button again to enter the diagnostic mode.
- Close the dishwasher door if it is open, and the diagnostic cycle will run.
What does it mean when all the lights flash on a dishwasher?
Continuously blinking Start, Wash, or Clean lights may be a sign that your dishwasher has electrical, water flow, or door latching problems. Some glitches only require a press of the reset button. Other problems might need the attention of a professional technician.
Why is the rinse aid light on my dishwasher?
When the rinse aid light on your dishwasher comes on, it’s time to refill. The rinse aid reservoir is located on the inside of your dishwasher’s door, next to the detergent reservoir. When the salt light on your dishwasher comes on, it’s time to refill.
Is rinse aid necessary?
You need rinse aid because dishwasher detergents don’t work the same as they used to. Every new dishwasher has a rinse-aid dispenser because rinse aid is essentially mandatory if you want your dishwasher to work well these days, according to every industry person we talked to.
How do I find the error code on my Whirlpool dishwasher?
Try the action below to run a diagnostic test on your dishwasher:
- 1 – Turn the dishwasher on.
- 2 – Press the rinse cycle button.
- 3 – Turn the dishwasher back off.
- 4 – Hold down the start button while you turn the dishwasher back to on.
- 5 – When the light starts flashing immediately let go of the start button.
What do the symbols mean on a dishwasher?
You can look for the word which says “dishwasher safe”. Besides, there are some symbols which also state the same things. Symbols like plates underwater shower are an indication of dishwasher safe water bottle. Sometimes, they also use bottles symbol instead of plates.
Where do I Find my Whirlpool dishwasher model number?
If you still need assistance, call us at 1-800-253-1301. In Canada, visit our website at www.whirlpool.ca or call us at 1-800-807-6777. You will need your model and seri al number located near the door on the right-hand or left-hand side of the dishwasher interior.
What causes a Whirlpool dishwasher to return an error code?
Your dishwasher will return this code if there is a problem with the optical water sensor in it. The sensor may not actually be faulty but indicate that the water inside the dishwasher is very dirty. This condition triggers an additional rinse cycle.
What do the arrows mean on a dishwasher?
The most common indicators here are salt refill and rinse-aid refill indicators or delay timers. The salt refill indicator symbol is shown as two arrows that loosely represent an ‘S’. When this light is on, you should top up your dishwasher’s salt levels. The rinse aid refill indicator symbol looks like a ‘sparkle’/snowflake icon.