Which command tells you the path a packet takes from your computer to the destination?

Which command tells you the path a packet takes from your computer to the destination?

traceroute command
17.2. The UNIX/Linux traceroute command (tracert on a Windows computer) identifies the route a packet takes between your computer and the destination computer specified in the command.

Which command used to show the path of network?

The pathping command is similar to the tracert command. It’s used to show the path from the source computer to the destination computer.

Which command is used to see the path taken by packets across an IP network?

Traceroute is a network diagnostic tool used to track in real-time the pathway taken by a packet on an IP network from source to destination, reporting the IP addresses of all the routers it pinged in between. Traceroute also records the time taken for each hop the packet makes during its route to the destination.

What tool can you use to see how a packet travels from source to destination?

Traceroute is a computer network diagnostic tool for displaying the route (path), and measuring transit delays, of packets across an Internet Protocol (IP) network.

What does route command do?

The route command allows you to make manual entries into the network routing tables. The route command distinguishes between routes to hosts and routes to networks by interpreting the network address of the Destination variable, which can be specified either by symbolic name or numeric address.

How do you trace a command?

Take the following steps to run a traceroute in Microsoft ® Windows ®:

1. Press Windows key + R to open the Run window.
2. Enter cmd and press Enter to open a Command Prompt.
3. Enter tracert, a space, then the IP address or web address for the destination site (for example: tracert www.lexis.com).
4. Press Enter.

What command can you use to tell a device to send packets to itself?

Overview. The ping command allows you to send a signal to another computer (either on your local network or a computer on the Internet) to determine if it is active or if it can be reached.

Which of the following commands is used to discover the router path a packet takes as it passes over a network?

A. You need to use traceroute command, which display the route packets take to network host on the Internet.

What does the route command do?

What is network command?

Networking commands are used at the command prompt to get network information like the IP address of the system, MAC address, network route traversed by a packet and the IP address of the server in which a website or URL is hosted.

How to find the route a packet is taking?

A. You need to use traceroute command, which display the route packets take to network host on the Internet. It traces a packet from your computer to an Internet host, showing how many hops the packet requires to reach the host and how long each hop takes. Very useful to troubleshot network problem.

How are packets sent from source to destination?

The traceroute utility uses this mechanism to find the specific path that a packet is taking from source to destination. The first packet will be sent out using a TTL of 1; if it reaches the destination then a response will tell the utility to stop continuing to look for further hops.

Which is the traceroute command in Packet Tracer?

In Windows, the command is tracert, whereas the macOS and Linux operating systems use the traceroute command. In Packet Tracer, you use the Windows tracert command. The hops are simulated.

What do you do with the route command?

The Route command provides the device’s routing tables. To get this result, just type route print. The Route command returns the routing table, and the user can make changes by Commands such as Route Add, Route Delete, and Route Change, which allows modifying the routing table as a requirement.