What does a solid white line at the side of the road mean?

What does a solid white line at the side of the road mean?

Explanation: The continuous white line shows the edge of the carriageway. It can be especially useful when visibility is restricted, such as at night or in bad weather. It’s discontinued in some places; for example, at junctions, lay-bys, entrances or other openings.

What is the solid white line on the edge of the road called?

Solid white lines define lanes of traffic going in the same direction, or they show you the location of the shoulder of the road. Broken or “dotted” white lines are used to show the center line between lanes. Yellow lines show you where traffic is going in different directions.

What does the white line indicate?

WHITE LINES painted on the pavement indicate traffic traveling in your direction. Broken White Line: you may change lanes if it is safe to do so. Solid White Line: requires you to stay within the lane and also marks the shoulder of the roadway.

What does a white edge line mean?

White lane markings – Solid white lines are used to mark both edges of two-way roads and the right edge of one-way roads. You should not drive to the right of the edge line. A dashed white line between lanes of traffic means that you may cross it to change lanes if it is safe.

Can you cross a solid white line to turn into a driveway?

You can cross a single continuous centre line (even if there is a broken line on the other side) to enter or leave a private property (eg a driveway) or another road. However you cannot cross the single unbroken line to perform a u-turn or to overtake.

When can you cross a solid white line on the road?

Solid White Line You should not cross this line to change lanes unless necessary and safe to do so. In some states, it is illegal to cross a solid white line; in California, it is legal to do so. Only cross a solid white line if it is safe to do so; solid white lines are meant to discourage you from changing lanes.

Can you cross over a solid white line while driving?

It is legal, although “discouraged,” to cross a single solid white line. It is illegal to cross double white lines on or off the interstates. All states, including Colorado, follow the guidance for roadway markings from the Federal Highway Administration’s Manual on Uniform Traffic Control Devices (MUTCD).

Is it OK to cross a solid white line?

Under NSW road rules, you can cross a dividing line to enter or leave a property or road “by the shortest route”. The only other circumstances in which NSW motorists can cross unbroken lines is to maintain the safe passing distance when overtaking a bicycle rider or to avoid an obstruction on the road.

What do single broken white lines mean on the road?

A dashed or broken white line indicates lanes of a road where there are no overtaking restrictions and the road is not considered to have any unusual or dangerous features. On standard roads these lines are 100mm wide, 3m long and have a 7m gap between them.

What does a white line on the road mean?

A white line is there to separate lanes of traffic moving in the same direction. The dashed lines indicate that you are free to change lanes. These are most commonly seen on the highway, but can also be seen in city streets.

What is the edge line on the road?

An edge line means, a line marked along the road at or near the far left or the far right hand side of the road. There does not need to be a sign accompanying the yellow line. The fact that there is a yellow line there creates the offence.

What are the yellow lines on road?

A yellow line (solid or dashed) indicates that crossing the line will place a driver in a lane where opposing traffic is coming at the driver. A double yellow line is a painted marking separating two lanes of a road.