Table of Contents
- 1 What is the most suitable material for a kitchen floor in a food premises?
- 2 What type of floor do you need in a commercial kitchen?
- 3 When designing a food premises what factors need to be considered?
- 4 Why is coving required at the juncture of floors and walls?
- 5 What do you put on commercial kitchen walls?
- 6 What should be considered when choosing flooring material?
- 7 What are the factors that affect the selection of flooring material?
What is the most suitable material for a kitchen floor in a food premises?
Floor coverings must be impervious, non-absorbent, washable and of non-toxic material. Floor surfaces that will satisfy the requirements of the Regulations include: Vinyl safety flooring, floor tiles (quarry/ceramic/vinyl), terrazzo tiling, cast resin flooring.
What is required for flooring in a food preparation area?
Floors in a food prep area must essentially be non-slip so that they prevent spills and accidents. All flooring in a food prep area of a restaurant must be easy to keep clean in order to prevent mold and bacteria from forming there.
What type of floor do you need in a commercial kitchen?
The two most popular flooring options for commercial kitchens are ceramic tile and vinyl flooring, while natural stone tile and brick are used in some specialty environments.
What are the requirements relating to the design of a food premises?
The layout, design, construction and size of food premises shall: a) permit adequate cleaning and/or disinfection to protect against: – accumulation of dirt – contact with toxic materials – shedding of particles into food – formation of condensation or mould on surfaces b) permit good food hygiene practices including …
When designing a food premises what factors need to be considered?
Food premises must be big enough. They must have sufficient space to do all that is required to run a hygienic and efficient food operation. The amount of space required depends on the complexity of the operation.
What is safety flooring?
Safety flooring is specially engineered to minimise slip risk and provide safe movement in low to high traffic environments. It is often referred to as non-slip flooring, however, this is a misconception. It is designed to minimise the risk of injury in areas that are exposed to the spillage of contaminants.
Why is coving required at the juncture of floors and walls?
When cleaning is accomplished by spraying or flushing, coving and sealing of the floor/wall junctures is required to provide a surface that is conducive to water flushing.
Which flooring is best for commercial use?
Low-maintenance flooring for commercial applications: 5 materials you should consider
- Quarry tile. Quarry tile is about as durable as a flooring product can get, although it offers little design versatility.
- Carpet tile.
- Luxury vinyl tile (LVT)
- Epoxy flooring systems.
- Polished concrete.
What do you put on commercial kitchen walls?
Standard wall construction for restaurant kitchens should be water-resistant gypsum board (commonly called “green board” for the color) over a metal stud wall. Green board is the material of choice because of the moisture protection it offers in wet environments, like kitchen prep areas.
What are the requirements for a kitchen?
Kitchen Requirements
- Enough space to properly prepare and produce the recipes laid out in assignments.
- Have sufficient, basic kitchen equipment in good working order.
- All counter tops should be in good, hygienic condition.
What should be considered when choosing flooring material?
The flooring material selected should be strong and durable enough to resist various weathering actions, loads, decaying, etc. The life of flooring material should be approximately equal to the life of other components of the structure. Marble, concrete, mosaic floors are best in durability compared to other materials. 2. Appearance
How are fire ratings achieved in walls and ceilings?
Required fire ratings are usually achieved by layering approved materials and providing insulation within the wall.
What are the factors that affect the selection of flooring material?
Factors Affecting Selection of Flooring Material. 1 1. Durability. The flooring material selected should be strong and durable enough to resist various weathering actions, loads, decaying, etc. The life 2 2. Appearance. 3 3. Initial Cost. 4 4. Hardness. 5 5. Smoothness.
What kind of flooring should be used for fire resistance?
The floor should have good fire resistance, especially upper floors. Concrete, marble, terrazzo are having good fire resistance but materials like timber, cork, rubber are weak against fire hence, fire resistance base layer should be provided when these materials are selected. 10. Maintenance