Are toilets universal size?

Are toilets universal size?

Are there different sizes of toilet? Yes, toilets come in a range of different sizes, that’s why it’s important to measure your existing toilet seat before you buy.

What is the most common rough-in size for a toilet?

12 inches
12 inches is the most common toilet rough-in size. However, it’s useful to know that toilet’s also come in: 10-inch rough-in.

Can you replace a 10-inch rough-in toilet with a 12 inch?

The rough-in for your bathroom plumbing should match the rough-in for the toilet. Even if a toilet is designed for a 10-inch rough-in, you can still install it in a space with a 12-inch rough-in.

How do I know what size toilet I need?

Measure from the wall behind the toilet to the center of one of the closet bolts (which hold the toilet down). If the toilet has four closet bolts, measure to the center of one of the rear ones. Then measure from the center of the mounting holes to the back of the new toilet you’re considering.

Can any toilet fit?

For a standard toilet, the rough-in measurement should be between 11 inches and 13 inches. If the rough-in measurement is not between 11 inches and 13 inches, a standard toilet will not fit the space, and you will need to look for a toilet designed for that specific rough-in distance.

Can you replace a 14 inch rough in toilet with a 12-inch rough in toilet?

Replace a 14-inch rough-in toilet with a 12-inch rough-in toilet. You can definitely replace a toilet with a rough-in of 14 inches with one with a rough of 12 inches. The problem with this method is that a 2-inch gap will be left between the toilet tank and the wall. Install an offset toilet flange.

Do I need a 10 or 12 toilet?

A 10-inch rough-in is the usual measurement installed in older homes. However, the 12-inch measurement is the standard for modern toilet plumbing. Most toilets that you encounter in retail outlets have 12-inch rough-in dimensions.

Why would I want an elongated toilet bowl?

Elongated bowls are also considered more ‘hygienic’ in that the larger surface area of the bowl makes is easier for men and children to use with less mess. The longer bowl size is also a requirement for ADA use, and the longer/wider bowl is generally easier to use for those with mobility issues.

Do I need a 10 or 12-inch toilet?

How do I choose the right size toilet?

Make sure the toilet dimensions will fit your space. Start by measuring the rough-in size. This is the distance between the wall behind the toilet and the center of the drainpipe or the bolts that hold the toilet to the floor. It’s best to perform this measurement before you remove the old toilet.

What’s the perfect height for a toilet?

A regular toilet measures a standard height of roughly 14″ to 15″ from floor to bowl. When you install a toilet seat to the bowl, then you may get a maximum height of 16″. Of course, you can add a toiler riser seat to give your toilet height a boost, however they can be a little difficult to get a solid seating experience.

What is an average size of a toilet?

What is the standard size of a toilet? The general rule of thumb for standard toilet sizing is between 27 and 30 inches deep, the back height is usually between 21 to 31 inches and the width is about 20 inches. It is also important to note that an ada compliant toilet must be of 17 to 19 inches in seat height.

What are the standard dimensions of a toilet?

Most toilets are about 26” tall with a seat height of anywhere from 14 to 16 inches. Standard Tank Width: 18.75 inches Standard Toilet Depth: 27.5 inches Standard Toilet Height: 26 inches Standard Toilet Seat Height: 14-16 inches

What is the minimum size for a toilet room?

Minimum space requirements. The minimum space that is allowed for a toilet in one or two-family dwellings of three or less is 37.5 cm (15 inches) on each side of the toilet, which means that there should be at least 37.5 cm (15 inches) starting from the centre line of the toilet to the nearest wall, washbasin or cabinet on the toilet’s left or right.