How do I get my Altec Lansing speakers to work?

How do I get my Altec Lansing speakers to work?

-Press and hold the Power button for around 5s. Your speaker will enter pairing mode with voice once powered on. -Go to the Bluetooth Manager of your Bluetooth device. Search Bluetooth devices and select “JH2O Mini” to start connecting.

How do I know if my Altec speaker is charging?

Charging: When charging, an red LED light will illuminate. The red light will turn o when your unit is fully charged. Power on your speaker.

How do I connect my Altec speakers to my TV?

Page 1

1. HOW DO I CONNECT MY SPEAKERS TO A TV? GOOD – using the included AUX to RCA cable. Locate the AUX to RCA cable within the packaging 2.
2. BETTER – using an Optical Digital Output. Make sure you have an Optical to Optical cable.
3. BEST – using HDMI to ARC. On the back of the main speaker locate the HDMI port.

Why is my Altec Lansing speaker not charging?

If the speaker is not charging there may be a problem with the charging port or the power cable. Try a different power source or a different cable. If the problem persists, consider replacing the charging port using our back panel replacement guide.

How do I connect to Altec Lansing?

Android smartphone If you have an Android, either swipe down from the top of your screen and tap on the Bluetooth icon or tap on the Settings, then find Bluetooth and tap on it. Turn the Bluetooth on by taping and then look for available devices. When you find the name of your Altec Lansing speaker, tap on pair.

Why is my Altec Lansing speaker blinking blue and red?

Once your speaker is powered on you will see a flashing blue and red LED light which indicates that your speaker is in pairing mode. Select “Baby Boom” on the Bluetooth manager on your smartphone – once connected you will hear a loud beep.

Why is my Altec speaker not working?

Broken Power Button If the power adapter is plugged in, and the light on the adapter is on, make sure the adapter is connect to the speaker. If the speaker still does not powers up when the adapter is plugged in, regardless of charging time, then the power button might be faulty.

How do I plug speakers into my TV?

1. Connect an HDMI cable to the HDMI ports labeled ARC, or the port identified in your manual that supports ARC.
2. Set Speakers to Audio system. The steps below are an example on Android TV or Google TV.
3. Turn on the Control for HDMI setting on both the TV and the receiver or home theater system.

How do I hook up my speakers to my TV?

If your TV doesn’t use RCA connectors for audio output, it may have a headphone out port (3.5mm port). You can use this to connect your TV to the speakers. They’re the same connector used on phones, tablets, laptops, etc. For this, you’ll need to use a 3.5mm audio jack on the TV end and a RCA jack on the speaker end.

Why is my Altec Lansing speaker not connecting?

Faulty Connection If your speaker is still unable to connect to a smartphone via Bluetooth, perform a system restart. To perform a system restart, press and hold both the volume up and volume down buttons located on top of the speaker for 5-7 seconds. This will return the speaker to its original factory setting.

Can you connect Altec speakers together?

Press and hold the Vol + & Vol – buttons on the parent speaker simultaneously for approximately 2 seconds or until the LED status light turns green. 4. Quickly tap the Vol + & Vol – buttons simultaneously on the child speaker. The connected speakers will now play the same music from the same audio source.

How do I charge my Altec Lansing speaker?

How do I charge my Altec Lansing speaker? To charge your Altec Lansing speaker, locate the charging port – the location of the charging port differs on every speaker – the charging port is typically located on the back or on the bottom of a speaker. Plug in included charging cable and connect to a power source.

What does House Party Mode on Altec Lansing do?

Once powered on, the LED indicator light on the speaker should automatically begin flashing red/blue. What is House Party Mode? House Party Mode is the newest feature on select Altec Lansing speakers. It is the pairing setting that enables you to connect up to 50 speakers at once. This can be used to create a multi-room surround sound experience.

How do you connect a speaker to a computer?

To connect your speaker, start by pressing and holding the power button for approximately 5-8 seconds when powering on. Once your speaker is powered on you will see a flashing blue and red LED light which indicates that your speaker is in pairing mode.

How can I tell if my speaker is in pairing mode?

Once your speaker is powered on you will see a flashing blue and red LED light which indicates that your speaker is in pairing mode. Select “Baby Boom” on the Bluetooth manager on your smartphone – once connected you will hear a loud beep. What do I do if I’m having problems connecting my speaker to Bluetooth?