How many quarts of oil does a 2006 GMC Envoy take?

How many quarts of oil does a 2006 GMC Envoy take?

7 quarts
Engine Oil SAE 5W-30 is preferred. Capacity: 7 quarts.

How many quarts of oil does a GMC Envoy take?

Engine Oil

Viscosity: 10W-30 (Above -18) 5W-30 (All TEMPS) SAE 5W-30 is preferred.
Capacity: 7 quarts. (with filter)After refill check oil level.
Torque: 19 ft/lbs (Oil Drain Plug)

How much oil does a 2006 GMC Envoy Denali hold?

Engine Oil SAE 5W-30 is preferred. Capacity: 6 quarts.

How much oil does a 4.2 Vortec take?

How much oil does a 4.2 Vortec take? Engine Oil 7 quarts. (with filter)After refill check oil level.

How many quarts does a 2006 GMC Sierra take?

6 quarts
Capacity: 6 quarts. (with filter)After refill check oil level.

What kind of transmission fluid does a 2006 GMC Envoy take?

Valvoline Synthetic Transmission Fluid Dexron VI 1 Quart.

How much oil does a 2006 Trailblazer hold?

Capacity: 7 quarts. (with filter)After refill check oil level.

How much oil does a 4200 Vortec take?

How much oil does a 4200 Vortec take? All models came equipped with a four-speed automatic transmission. When you change the oil and filter on your Trailblazer, refill it with 6 quarts of oil if you have the Vortex 5300 or 7 quarts for the Vortec 4200.

What kind of engine does a GMC Envoy have?

The 2006 GMC Envoy has two engine options — a 4.2-liter six-cylinder engine code S and a 5.3-liter eight-cylinder engine code M. Locate the VIN to identify the engine code.

Where is the VIN on a 2006 GMC Envoy?

The 2006 GMC Envoy has two engine options — a 4.2-liter six-cylinder engine code S and a 5.3-liter eight-cylinder engine code M. Locate the VIN to identify the engine code. The VIN is located on the bottom, driver-side corner of the front windshield.

What kind of oil does envoy 5.3 liter use?

The 5.3-liter Envoy uses 6.1 quarts of SAE 5w30 with a WIX 51042 Oil Filter or other manufacturer’s equivalent. Tighten the oil drain plug to 18 foot-pounds of torque. Always inspect the drain plug and gasket when replacing.

How much torque does a envoy drain plug have?

If a torque wrench is unavailable, 19 foot-pounds of torque is equivalent to getting the drain plug snug by hand and then turning the socket wrench approximately three-quarters to one full turn past snug. The 5.3-liter Envoy uses 6.1 quarts of SAE 5w30 with a WIX 51042 Oil Filter or other manufacturer’s equivalent.

Begin typing your search term above and press enter to search. Press ESC to cancel.

Back To Top