Can I use ATF 4 transmission fluid?

Can I use ATF 4 transmission fluid?

ATF+4 is fully compatible with all transmission applications where ATF+, ATF+2 and ATF+3 Automatic Transmission Fluids are specified. Only certified ATF+4 is recommended for service of FCA vehicles as where ATF+4 is specified in the owner’s manual.

What is ATF 4 transmission fluid?

atf4. Valvoline ATF + 4 is a uniquely blended automatic transmission fluid that meets Chrysler Material Standard MS-9602. It is designed as a factory fill fluid for all 1998 and later Chrysler Corporation automatic transmissions and transaxles.

What kind of transmission fluid does a 727 Torqueflite take?

Super Moderator. ATF+4 is the recommended replacement for ALL Torqueflite transmissions, per Chrysler.

Can I use ATF MD 3 instead of ATF 4?

ATF+4 is backward compatible with ATF+3 so you can use it with no issues.

Do I have to use Mopar ATF 4?

Most ATF+4 actually uses an identical formula and friction modifier properties as specified by Mopar. This is required by Mopar for them to list it as compatible with Chrysler vehicles. I use the Super Tech from Walmart and it saves me about $3 a quart over name brand stuff like Castrol.

Is Mopar ATF 4 synthetic?

Although Chrysler does not market it as such, Mopar® ATF+4® Transmission Fluid would meet the marketing definitions for being a synthetic or synthetic blend oil. ATF+4® has been formulated to meet the exact requirements of FCA (formerly known as Chrysler) transmissions.

What can you use ATF 4 in?

Chrysler, Dodge, Ram, Jeep, Mopar, and Fiat cars and trucks You may use ATF +4 in most applications that call for older Dexron and Mercon fluids.

Can you use Type F transmission fluid in a Dodge?

RAY: If you put Dexron, Mercon or Chrysler 7176 transmission fluid in just about any transmission, it will perform just fine. And in transmissions that are not designed for it, Type F fluid will cause rough shifts, and can even cause damage by making the torque converter engage before it should.

What kind of transmission fluid does a Chrysler take?

FRAM Chrysler ATF+4 fluid is recommended for use in all transmissions, hydraulic systems, and power steering units manufactured by American, European, Korean, Japanese and other manufactures from around the world specifying Chrysler ATF+4, ATF+3 or ATF+2 Type Fluids.

Can you mix Dexron VI with ATF 4?

MaxLife® ATF, ATF +4 and DEXRON® VI are all synthetic transmission fluids. Is it OK to mix synthetic ATF with a conventional and/or synthetic blend ATF? Yes. Synthetic ATF and conventional fluids are 100 percent compatible with each other.

Is the Chrysler ATF fluid a synthetic fluid?

That does not mean it is right. Chrysler takes the characteristic of fluid in consideration when calibrating shifts. Not only is the fluid a synthetic (near perhaps) but the additive package consists of superiour materials that last longer or survive higher temps for longer periods of timel JMHO of course.

What kind of ATF does a Toyota need?

Newer Toyota and Lexus vehicles require Toyota Type-IV (T4) synthetic ATF. Nearly all Toyota and Lexus cars and trucks before 2005 call for Dexron-III ATF. While Toyota has its own official brand that it sells at its dealerships, any good quality Dexron-III will do.

Why is Chrylser trannies not available with ATF + 4?

The reason is Chrylser trannies are suck a small % of their business they can’t justify stocking the higher priced ATF+4 also. They have learned it works to get it out of shop. The fact that it doesn’t last is not their concern.

What kind of fluid does a Dodge Ram use?

1999 Dodge Ram 2500, 5.9L 24v, Auto Trans, 4×4, SRW, LB, Quad Cab, 285 75R16 tires, 131K miles, Airdog 100 with drawstraw V, Isspro Mechanical 0-30psi FP gauge with isolator. It should have ATF+4 installed. Many trans shops use dexron as their only fluidl.