Table of Contents
Here is an example of likely steps:
- Turn on your TV or another device you wish to control.
- Press and release the DEVICE button on your remote that is associated with the product you want to control (TV, etc.).
- Press the Device Button again, as well as the POWER button at the same time.
- Release both buttons.
How do I reprogram my RCA remote control?
Follow these easy steps:
- Manually turn on your TV.
- Aim your remote at the TV panel and press and hold the TV button.
- Once the light is turned on, at the same time, press and hold the “On/Off” button until the light turns on again.
- Press the Play or the Slow button on your remote for five seconds.
How do I program my RCA universal remote without a code?
If your RCA universal remote does not have a Code Search button
- Power on the equipment you want to control.
- Press and hold the button on the universal remote that matches the device you’re pairing (e.g. if it’s a DVD player, press the DVD button).
Where is the code search button on RCA universal remote?
Press and hold the Code Search button until the light turns on. This button is usually at the top of the remote. When the light comes on, you can let go of the button.
How do you program one for all remote?
How to Program your One For All® remote
- PRESS the button for the device you want to program,(TV,VCR,CABLE,etc.), then RELEASE.
- PRESS and HOLD the SETUP button until the red LED flashes twice, then RELEASE.
- ENTER the 3 digit code for your brand.
- You should receive 2 quick flashes after entering your code.
How do you program a RCA universal remote rcr3273e?
Auto Code Search and Entry
- Manually turn on the component you want the remote to control.
- Press and hold the component key you wish to program.
- While holding the component key down, press and hold the POWER key.
- Release both keys.
- Press and release the PLAY key, then wait five seconds to see if your component turns off.