Table of Contents
What engines fit in a Jeep XJ?
The XJ was released with two available engines; one being the AMC 2.5L, carbureted four-cylinder with 105 hp. This was AMC’s newly designed and released engine, whereas they had used the GM 151 Iron Duke four-cylinder in previous Jeeps. The second engine was the Chevrolet 2.8L V6, also carbureted and rated at 115 hp.
How much horsepower does a 1988 Jeep Cherokee have?
| SPEED READING | |
|---|---|
| THE &RSQUO84 JEEP CHEROKEE/ WAGONEER XJ | 2.5L (2.46) FOUR-CYLINDER |
| Overall height: 63.2 in. | Horsepower:105 hp @ 5,{{{200}}} rpm |
| Curb weight: 2,863 lbs. (two- door) | Torque: 135 lb-ft @ 2,800 rpm |
| Transmission (standard): T-4 or AX-4 four-speed manual | Transmission (standard): T-4 or AX-4 four-speed manual |
Which engine is best for Jeep Cherokee?
Engine Options, Horsepower, and Acceleration The Jeep Cherokee’s base engine is especially weak, and performance from the V6 is only adequate. The turbocharged four-cylinder provides the best acceleration, but all engines are hampered by an automatic transmission that feels unrefined and shifts unevenly.
What engine is in a 1988 Jeep Cherokee?
Engines
| Name | Displacement | Years |
|---|---|---|
| 4.0L AMC 242 | 3964 cc (242 CID) | 1987 |
| 1988–1990 | ||
| 1991–2001 | ||
| 2.5L TurboDiesel VM 425 | 2499 cc (153 CID) | 1994–2001 |
What kind of engine does a Jeep XJ have?
The XJ was released with two available engines; one being the AMC 2.5L, carbureted four-cylinder with 105 hp. This was AMC’s newly designed and released engine, whereas they had used the GM 151 Iron Duke four-cylinder in previous Jeeps.
Can a jeep be converted to a GM engine?
Jeep XJ Cherokee / Wagoneer & MJ Comanche One of the most fascinating powertrain conversion platforms among the Jeeps are those into the Jeep XJ Cherokee. The conversion results can be fantastic. With improvements in power, fuel economy, reliability and broad range driveability, there is nothing like an XJ with a GM V8.
When did the stage II XJ get a new engine?
Stage II XJ’s were upgraded to New Process’ new NP231 part-time transfer case or the part/full-time NP242 in 1987. These transfer cases remained through the 2001 model year. It is crucial to discuss transmissions early on. They are sometimes more central to the conversion than the engine.
Can a 4.6 Stroker be installed in a jeep?
The answer is to install a Golen Engine 4.6L Jeep Stroker engine. With 270hp and 300 ft lbs of torque, it will bring life back to your Jeep and make it fun to drive again!! Facts you need to know about our Jeep 4.6 Stroker: Built to be a direct bolt-in replacement for factory 4.2 or Jeep 4.0 engines from any year