Where is the OBD2 plug in a Honda Odyssey?

Where is the OBD2 plug in a Honda Odyssey?

The obd-ii port on a 2008 honda odyssey is located under the steering wheel, beneath the dashboard.

Where is OBD-II port location?

The OBD-II port is usually located under the dashboard, beneath the steering wheel column (1 – 3 in the diagram below). If not located beneath the steering column, look for the port in the areas indicated by numbers 4 – 9.

Where is the OBD port on a 2006 Honda Odyssey?

Yep, down low below the steering wheel, just forward of where the lower dash panel ends.

How many OBD2 ports does a car have?

The OBD-II on-board computer features a 16-pin port located under the driver’s side dash. It allows a mechanic or anyone else to read the error code using a special scan tool.

Where is the engine code on a Honda Odyssey?

The engine number is stamped into the engine block. It is on the front.

Where is the diagnostic port on a 2004 Honda CRV?

If You want to know where the OBD II port is located on Your 2004 Honda CR-V, then You’ve come to the right place. The location of the OBD II port is on the bottom right of the steering wheel. Most vehicles have the port on the underside of the left steering wheel but Your car has it on the right.

How do I plug in OBD2?

Plug the standard OBD2 connector into the vehicle’s port located under the driver’s side of the dashboard. Turn on the car to power the scan tool or code reader. If necessary, enter any vehicle-specific information requested. Many tools will ask for the Vehicle Identification Number (VIN).

Where is the OBD2 port in a 2005 Honda Accord?

OBD connector location for Honda Accord 8 (2007 – 2015)

1. The OBD2 socket is located under the steering wheel in the fuses box.
2. OBD socket is near the hood lever.
3. You can see the diagnostics port near the fuses.

Where do you plug in OBD code reader?

Plug the standard OBD2 connector into the vehicle’s port located under the driver’s side of the dashboard. Turn on the car to power the scan tool or code reader.

Are all OBD2 ports the same?

All OBD-II pinouts use the same connector, but different pins are used with the exception of pin 4 (battery ground) and pin 16 (battery positive).