Table of Contents
Which of the following is an alarm initiating device?
Fire alarm initiating devices include smoke detectors, sprinkler water flow switches, manual pull stations, and more.
What are the types of alarm detection system?
Alarm systems can be broadly divided into two types:
- a perimeter (or external) intrusion detection system (PIDS) or alarm.
- an internal security alarm system (SAS).
What are the detectors that are triggered by the visible products of combustion?
Photoelectric detectors are triggered by the visible products of combustion. Ionization smoke detectors work on the principle that burning materials release many different products of combustion.
What are the initiating devices?
Initiating devices: These components act as inputs to the fire alarm control unit and are either manually or automatically activated. Examples would be devices such as pull stations, heat detectors, duct detectors, and smoke detectors. Heat and smoke detectors have different categories of both kinds.
What is protective alarm system?
security and protection system, any of various means or devices designed to guard persons and property against a broad range of hazards, including crime, fire, accidents, espionage, sabotage, subversion, and attack.
What are the 2 types of smoke detectors?
Generally, there are two types of home smoke alarms: photoelectric and ionization.
What kind of smoke detectors are there?
There are two types of smoke alarms in general use for home smoke alarms: photoelectric and ionization. These smoke alarms sense the presence of smoke differently. The type of smoke produced by a fire depends on the type of fire.
What type of detector detects fire?
Smoke detectors
Smoke detectors utilize the smoke in the air to quickly detect fires. There are three subtypes of smoke detectors: Photoelectric alarms: These alarms utilize a photoelectric sensor, which means it uses a light beam to detect smoke.
Which is the best fire detection and alarm system?
An air-aspirating smoke detection system provides the most rapid indication of fire, but these systems are five to 10 times as expensive. The type of fire detection and alarm system used in your facility should be based upon your fire safety objectives. These objectives flow from a risk assessment of your facility and operation.
How does a non addressable fire alarm system work?
In non-addressable systems, the zone will be identified, but a repair person will have to check each detector in that zone to determine which one is not working. Notification appliances are the audible, visual, and other devices located throughout the facility that warn occupants when the system has detected a fire.
Do you need a smoke detection and alarm system?
They will not, however, operate as quickly as a smoke detection system. This is why facilities where rapid notice is essential, even when equipped with sprinklers, still need detection and alarm systems. The most basic alarm system does not include detection. It has manual pull stations and sounds only a local alarm.
Where are fire detectors located in a building?
They are typically located along routes of travel that would be used while exiting the building. Detectors are available in a wide variety of types. The major categories are heat, smoke, and flame detectors. Within each category are numerous additional specific types.