How do you reset the lights on a BMW x3?

How do you reset the lights on a BMW x3?

Locate the small odometer button near the bottom left corner of the instrument panel. Press and hold it until the service message appears. Release the button, and press and hold it again until the message says “Reset?”.

How do you reset the inspection light on a 2006 BMW x3?

How do I reset the inspection light on my BMW?

1. Ignition OFF (POS 0)
2. Press and Hold the trip odometer button while turning key to position 1 (ACCESSORY)
3. Keep the button depressed (about 5 secs.) until you see “Oil Service” or “Inspection” with “Reset” or “Re” in the display then let go.

How do I reset my BMW e83?

Press and hold S/R button (on the left). While still holding on S/R button, insert and turn your key on but DO NOT start the car. Keep on holding till RESET appears. Release S/R button and press and hold it again till RESET starts flashing.

How do you reset the maintenance light on a 2016 BMW x3?

To reset the oil level warning or maintenance light in your 2016 bmw x3 vehicle, turn the ignition key to the “on” position and depress the gas pedal slowly three times. Release and start your vehicle and the oil light should indicate a reset.

How do I reset the service light on my BMW?

Check your owner’s manual to be sure. Locate the small odometer button near the bottom left corner of the instrument panel. Press and hold it until the service message appears. Release the button, and press and hold it again until the message says “Reset?”.

What does a BMW X3 brake warning light mean?

BMW X3 brake warning light – Indicates a fault within the braking system. Sometimes it could be something small like the handbrake being engaged, or it could mean that the brake fluid needs to be topped up, or an ABS sensor needs to be replacd, generally coupled with the ABS warning light. BMW X3 seatbelt warning light – buckle up!

Why is MY BMW brake light not reset?

The generic OBD-II scanner may not be able to reset BMW CBS and brake light. If you cannot reset the brake light, check the brakes’ condition on the opposite axle. For example, if you replaced the front brake pads and sensor and can’t reset the brake light, you should check the rear brake pads’ condition. Why won’t my BMW brake light won’t reset?

What does the cruise control light on BMW X3 mean?

BMW X3 cruise control dashboard light – indicates that the cruise control function has been activated. Can be switched on or off at the push of a button.